How can I fix my 1999 dodge caravan sport se to quit hesitate

SOURCE: how to Change, back three plugs on a 2003 Dodge caravan 3.3l

you need to put a ratchet ******** the front of the engine and remove the dog bone engine mount this will allow the engine to be pulled forward with strap and you can reach behind and remove the plugs or you can get them from underneath the van hand tightened with a spark plug socket and wrench if you overtighten they will break

SOURCE: lights flashing 98 dodge grand caravan SE sport

I have a ford explorer model 2000 engine keeps cutting out

SOURCE: Need to replace the heater core in a 1995 Dodge Grand Caravan SE

1991-95 Models

1. Disable the air bag system by disconnecting the negative battery cable.
2. Have the system discharged by a qualified professional mechanic using an approved recovery/recycling machine.
3. Drain the cooling system.
4. Remove the steering column cover and left and right side under panel silencers.
5. Remove the center bezel by unclipping it from the instrument panel.
6. Remove the accessory switch carrier and the heater/air conditioning control head.
7. Remove storage bin and lower right instrument panel.
8. Disconnect the blower motor lead under the right side of the instrument panel.
9. Remove the right side 40-way connector wiring bracket.
10. Remove the lower right reinforcement, body computer bracket and mid-to-lower reinforcement as an assembly.
11. Disconnect the vacuum lines at the brake booster and water valve.
12. Clamp off the heater hoses near the heater core and remove the hoses from the core tubes. Plug the hose ends and the core tubes to prevent spillage of coolant.
13. If equipped with air conditioning, remove the H-valve and condensation tube.
14. Disconnect the temperature control cable and vacuum harness at the connection at the top of the unit.
15. Remove the retaining nuts from the package mounting studs at the firewall. Disconnect the hanger strap from the package and rotate it aside.

1. Remove the temperature control door from the unit and clean the unit out with solvent. Lubricate the lower pivot rod and its well and install. Wrap the heater core and/or evaporator with foam tape and place in position. Secure with the screws.
2. Assemble the unit, making sure all vacuum tubes are properly routed.
3. Install the assembly to the vehicle and connect the vacuum harness. Install the nuts to the firewall and install the condensation tube. Fold the carpeting back into position.
4. Connect the hanger strap from the package and rotate it aside. Install the 2 brackets supporting the lower edge of the heater housing. Connect the blower motor wiring, resistor wiring and the temperature control cable.
5. Install the retaining screws from the right side to the steering column. Install the instrument panel trim covering and reinforcement.
6. Assemble the unit, making sure all vacuum tubes are properly routed.
7. Install the assembly to the vehicle and connect the vacuum harness. Install the nuts to the firewall and install the condensation tube. Fold the carpeting back into position.
8. Connect the hanger strap from the package and rotate it aside. Connect the blower motor wiring and temperature control cable.
9. Install the lower right reinforcement, body computer bracket and mid-to-lower reinforcement as an assembly.
10. Install the right side 40-way connector wiring bracket.
11. Install the lower right instrument panel and storage bin.
12. Install the heater/air conditioning control head and accessory switch carrier.
13. Install the center bezel to the instrument panel.
14. Install the under panel silencers and steering column cover.
15. Install the vacuum lines at the brake booster and water valve.
16. Connect the heater hoses to the core tubes.
17. Using new gaskets, install the H-valve and connect the refrigerant lines. Install the condensation tube.
18. Have the system evacuated and recharged by a qualified professional mechanic, utilizing the proper equipment. Add 2 fl. oz. (59 ml) of refrigerant oil during the recharge. Fill the cooling system.
19. Perform the Air Bag System Check procedures outlined in this section before connecting the negative battery cable.
20. Connect the negative battery cable and check the entire climate control system for proper operation and leaks.

SOURCE: My 1999 Dodge Grand Caravan left rear powered vent isn't working.

IF YOUR TALKING ABOUT THE POWER VENT WINDOW.IT MAY BE HYPER EXTENDED LIKE A KNEE OR ELBOW.TRY TAKING A SCREWDRIVER FROM THE OUTSIDE AND PUSHING THE HINGE INWARD JUST ENOUGH TO LET THE MOTOR WORK IT CLOSED.IF THE MOTOR ITSELF ISN'T WORKING PUSH THE HINGE JUST PAST CENTER THEN USE YOUR HAND TO CLOSE THE WINDOW PUSHING IT CLOSED WERE THE MOUNT IS UNTIL YOU CAN GET A NEW MOTOR.HOPE THIS HELPS

SOURCE: 1999 dodge caravan fuse box map/diagram

Under the hood. Under the cover for the fuse box is a map of locations