Cars & Trucks Logo

Related Topics:

d
dale Posted on Mar 26, 2014

Reset display Hi when i push the info button nothing happen and i push the reset button it scowl threw the menu but cant reset anything

3 Related Answers

Marvin Santos

  • 21 Answers
  • Posted on Feb 07, 2009

SOURCE: 97 JIMMY,PUSH 4X4 BUTTON,NOTHING HAPPENS

Hi,
When you switch it from 2H to 4H you can push the switch at any speed but if you switch to 4L the car must be stop and the shifter is in neutral position.
Anyway here is my suggestion.... I would check the switch it self 1st for proper contact, also check the owners manual if there is a fuse for 4X4.
The worse scenario is the 4X4 computer is dead and if you have problem with transfer case you would notice a whining noise.

Ad
alicantecoli

Colin Stickland

  • 22516 Answers
  • Posted on Jul 09, 2009

SOURCE: hi i have a 2005 renault master my problem is i

renault?? encrypted software --dealer only

Kevin Rahme

  • 401 Answers
  • Posted on Dec 23, 2009

SOURCE: electronic tranfer case switches are not working,

check the trasfercase shift control module and wiring
it's located on the passenger side
remove the carpet thresh hold
remove the kick pannel they are held on by clips
the module is behind the kick pannel
disconnect the module harness and see if it is corroded if so you need to replace the connector and the module
let me know if thats not it but i have done lots

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

3helpful
1answer

Trying to reset oil change light on my 2006 ford explorer. the setup/reset steps dont work. it just cycles through. Midas did the oil change a week ago. i called them and they tried to give me steps to...

Ther are two types of clusters this is the most common, let me know if this doesnt work,you will be using the trip/reset button, when button is said it means the trip/ rest button this is the only button you will use.1)push and release button untilSETUP MENU HOLD RESET is display
2) press and hold button until you see SYSTEM CHECK or SYSTEM CHECK HOLD SET is displayed then release button.
3)press and release button to scroll the menu until you see HOLD RESET IF NEW OIL .
4) with hold rest if new oil displayed now push button and hold until you see OIL LIFE SET 100% displayed release button and your done. hope this helps.
20helpful
3answers

How do you reset oil change indicator in a pontiac 2007 g5 coupe

Turn the key to the "on" position with the engine "off". Then step on the gas pedal to the floor 3 times.
0helpful
1answer

I need to reset the b service on my clk550. How

1.- Insert key into ignition, switch to position "1"
2.- Press the menu buttons repeatly until the mileage is displayed within the multifunction display.
3.- Press the cluster illumination button (trip reset button) 3 times in short succession. The battery voltage will be displayed and an audible signal will sound.
4.- Turn key in ignition to position "2"
5.- Press the Up and Down Arrow buttons until service menu appears.
6.- Press cluster illumination button (trip reset button) once. The oil type menu is displayed.
7.- Use the + and - buttons to select the oil used for service.
8.- Press the Up and Down buttons to confirm. The display will show : "Reset Oil Confirmation. Push Illumination button for 3 seconds".
9.- Press and hold the cluster illimination button for 3 seconds. The message "Service confirmed" is displayed.
5helpful
1answer

How do you reset oil light 2006 sts

Cadillac 2003-06 CTS, 2004-06 SRX with base audio system, 2005-06 STS
Press the up and down arrow on INFO button on right side of driver information center display to access the DIC menu. Once 100% Engine Oil Life menu is highlighted, press and hold the CLR button. The percentage will return to 100 and oil life indicator will be reset. Repeat steps if not reset to 100.
Cadillac 2003-06 CTS, 2004-06 SRX with Navigation System
Turn the system on by pressing the PWR/VOL knob once located at lower left of DIC display. Pres INFO button located to the left display to access the vehicle information menu. Turn the TUNE/SEL knob located at the lower right of the display until engine oil life is highlighted. Press the knob once to select it. Once the 100% engine oil life is displayed, press the multi- function button next to the reset prompt in the upper right corner of the display, the percentage will return to 100 and the oil life indicator will be reset. Repeat steps if not reset to 100.
2helpful
2answers

How do you reset the oil life indication on 2005 cts

Follow this procedure to reset the GM Oil Life System ™:

Press the up or down arrow on the INFO button located to the right of the Driver Information Center (DIC) display to access the DIC menu.
Once 100% ENGINE OIL LIFE menu item is highlighted, press and hold the CLR button.
The percentage will return to 100 and the oil life indicator will be reset.
Repeat the steps if the percentage does not return to 100.


Navigation System
Follow this procedure to reset the GM Oil Life System ™:

Turn the system on by pressing the PWR/VOL knob once. The PWR/VOL knob is located to the lower left of the DIC display.
Press the INFO button located to the left of the display to access the Vehicle Information menu.
Turn the TUNE/SEL knob located to the lower right of the display until Engine Oil Life is highlighted. Press the knob once to select it.
Once the 100% Engine Oil Life is displayed, press the multi-function button next to the Reset prompt in the upper right corner of the display.
The percentage will return to 100 and the oil life indicator will be reset.
Repeat the steps if the percentage does not return to 100.
1helpful
2answers

I have a pontiac g6 and my change oil light has been on. i went and got a oil change and nothing happened and i cant see where to put the tRANSNISSION FLUID??

With the "CHANGE OIL SOON" message displayed, press any of the three DIC buttons to clear the "CHANGE OIL SOON" message. Display "OIL LIFE RESET" on the DIC. Press and hold the "ENTER" button for at least one second. An "ACKNOWLEDGED" display message will appear for three seconds or until the next button is pressed. This will tell you the system has been reset. Turn the ignition to "OFF". If the "CHANGE OIL SOON" message comes back on when you start your vehicle, the engine oil life system has not reset. Repeat the procedure. on the 3.5 liter you have a dipstick near fire wall
Not finding what you are looking for?

40 views

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

john h

Level 3 Expert

29494 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...