Question about 2004 Dodge Intrepid
Repair place unhooked fuel filler neck from car, now its just hanging loose and not attached inside of the door you open to fuel. Looks like it takes 2 screws but its not working. Does anyone have pics of what it should look like? Repair place siad they didnt do it which is not the case and I need some help please!
Most fuel fillers have a couple of screws inside the cap area ,i think your being fobbed off try another local garage ,one thats knows what their doing .
Posted on Jul 24, 2013
Testimonial: "I agree, do you know if I can find a picture of where the screws go, position wise to save some money? "
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
Door panel will have to come off to repair, most likely has broken door handle or cable/linkage problem.
Posted on Nov 30, 2008
SOURCE: MAF Sensor 2004 Dodge Stratus
If your car has a MAF (Mass Air Flow) sensor, it would be located in the air delivery tube that runs from the air filter box to the throttle plate assembly on the intake manifold. It will have a wiring connector going to it, also. The MAF does exactly what it is called: It "senses" the volume, or "mass" of the air-flow; thusly it needs to be in the intake air tube. If you do NOT have such a device in the air-tube, you have a MAP sensor, (Manifold Absolute Pressure); this is another way of measuring the same air volume, albeit older technology. You will commonly find this device on the firewall, with a vacuum line running to the intake manifold.
I hope that this sheds some light on your question.
Thanks for choosing FixYa for advice!
Posted on Mar 06, 2009
You may have to replace the fuel filter, the fuel pressure regulator or the fuel pump.
First I would check the fuel pressure and also check for leaks. If there are no leaks and the pressure is fine than your fuel injectors are probably clogged or you may have an ignition problem or even a compression problem.
If you don't have good pressure and there are no leaks I would first replace the fuel filter or the fuel pressure regulator. If problem still exists I would then check and replace the fuel pump.
If you need any help in any one of these procedures just post it and I will give you step by step instructions.
Posted on Apr 22, 2009
yes it will swap and you have to remove it from the bottom of the van remove the screw/clips from inside the filler door and then from underneth disconect the filler tube ti tank and the vent hose to the tank i belive there is a bracket also holding the filler tube to the body with one bolt then it snakes out of the va r insalating is just reverse
Posted on Jun 25, 2009
Tips for a great answer:
Apr 13, 2015 | 2001 Dodge Grand Caravan
Oct 03, 2014 | 2004 Dodge Intrepid
Oct 04, 2010 | 2004 Dodge Ram 1500
Jun 26, 2010 | 1996 Ford Mustang
Nov 22, 2009 | 2000 Dodge Intrepid
Aug 23, 2009 | 2002 Hyundai Accent
Jun 25, 2009 | 1999 Dodge Grand Caravan
119 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: