1999 Saab 9-5 Logo

Related Topics:

Anonymous Posted on Jan 08, 2013

Break light failure message is displayed, but my break lights are working.

1 Answer

Anonymous

Level 1:

An expert who has achieved level 1.

New Friend:

An expert that has 1 follower.

Corporal:

An expert that has over 10 points.

Mayor:

An expert whose answer got voted for 2 times.

  • Contributor 3 Answers
  • Posted on Jan 08, 2013
Anonymous
Contributor
Level 1:

An expert who has achieved level 1.

New Friend:

An expert that has 1 follower.

Corporal:

An expert that has over 10 points.

Mayor:

An expert whose answer got voted for 2 times.

Joined: Jan 05, 2013
Answers
3
Questions
0
Helped
189
Points
22

Did you change to led lights?

1 Related Answer

Anonymous

  • 3 Answers
  • Posted on Sep 18, 2008

SOURCE: Breaklights

1st get autozone to clear the code, (free) The only thing I can think of that goes out when car is off and on when lights turn on is the parking lights on the side, the wires could be touching in the conduit, start car and pull brake fuse out, if the lights stay on you have a short, if only the park lights stay on (double filiment) look at the lighting system, but if the brake and driving light stay on, sounds like an ecu problem.

Ad

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
1answer

92 honda accord break lights wont turn off

test brake light switch for failure
0helpful
2answers

Today, after some shakiness when accelerating I had the "Check Engine Soon" coming on, than SLIP. I had reduced torque significantly noticable in higher speeds and cruise control failure.

run the fault codes to determine the failed sensor that put the light on
could be egine/transmission mounts or cv joints in the drive lines
0helpful
1answer

2004 Ford Ranger - My break lights and directional signals are not working. My head and tail lights do work. Any advice on what I should check?

Most common is a bad signal light/multifunction switch failure. The brake lights are wired into the signal light circuit within the switch
0helpful
1answer

Two lower break lights not working (top on in the back window is)

Power for the brake lights travel thru a light failure sensor which could have failed. The third brake light does not involve the sensor.
If both brake light bulbs have no voltage, the sensor may have failed.
1helpful
1answer

Battery/Power Steering failure while driving

Did you break the serpentine belt that drives the accessories ??
3helpful
1answer

2001 jaguar s type - Right tail lamp failure message.... I replaced bulbs and fuse and tail lights still don't work but the dual element right break light does illuminate when I press the break also right...

There is a harness that you unplugged for the rear tail lamp. Make sure it is fully pressed and locked. This is always the cause on jags for tail lamp failure.
0helpful
2answers

Where is the break switch on a 1995 chevy van

it's on the break pedal where the rod hooks up.
1helpful
2answers
1helpful
1answer

Dsc system failure

Most likey the ABS module took a dive. If all the fuses are ok you will need to get this diagnosed professionally.
Not finding what you are looking for?

92 views

Ask a Question

Usually answered in minutes!

Top Saab Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

john h

Level 3 Expert

29494 Answers

Sean Wright
Sean Wright

Level 3 Expert

2045 Answers

Are you a Saab Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...