Ultra Max Garden - Recent Questions, Troubleshooting & Support

I have had the same problem everyone else has had with these pumps. I did serious research on these pumps and came up with a rebuild kit some parts bought some I make. I did mine 2 years ago and still working like a champ and have done over 20 locally with no problems. If your pump is noisy or the impeller has fallen off (typical) due to water getting in the unit and causing the bearings to fail email me and I can rebuild your pump. The process is simple send me the pump I will look at it and see if it can be rebuilt at NO CHARGE if it can be rebuilt you will save over 60% of a new one. Don't spend $349 - $599 on a new one let me look at it for free if I can rebuild it great if not you will have to buy a new one. I am not a dealer for any pumps so you will not have to worry about me selling you a pump and if you want the old one back pay the shipping and it it all yours.

Hey Richard.. 1 oz. "weedkiller" to a gallon of water...

Read and FOLLOW EXACTLY the spray material directions for mixing and use. Wear protective clothing including gloves and eye protection when spraying. Do not smoke, eat or drink when spraying; "wash up" afterwards. Spray on a calm day. Otherwise, winds may blow spray material off target. It's often best to spray in the early morning or late afternoon so excessive heat won't quickly evaporate the spray material. Follow the directions for use and maintenance that come with your applicator. Dispose of left over spray material and clean your applicator according to the directions on the spray material and with the applicator. Keep spray materials and applicator away from children and pets. Do not store spray materials in any but the original container in which they were purchased.

www.thepondoutlet.com

Call or email, they will either sell the seals or tell you where you can find them

Yes it can email me.......

Thanks
Don

Hi FixYa Team
Turned out to be a faulty new pump !!
Thanks

Maurice_a

Called my installer who recommended replacing it with the Aquasurge model. Keeping my fingers crossed this one lasts.

Bad pumps, bad brand.

Ensure the membrane is protected with sand before laying the stone to avoid piercing the membrane.

Question edited for clarity and to add maker. https://www.houzz.com/discussions/1612541/old-montgomery-ward-tiller-model-gil-39032-d More information https://www.google.com/search?q=GIL+39032+rear+tine+tiller+belt+diagram Videos that may give an idea?

Unfortunately, Tractor Manuals from the big players are never free. There is a Service Manual in the first link, but you only get a flash of it. When you put 'Case 1294' into that site search, it still only gives a flash of it. https://www.google.com/search?q=Case+1294+manual ..

Here is a user guide, though I suspect you have one. It is the only source of programming information I can find. Version 1.5 May 2008 (onlinehome.us Chipper Champ 2 ' Chipper Machine ' TCSJOHNHUXLEY

All questions need full 'make model (what is is)' as first 3 words please. Very often, issues like this are a known fault and users tell the fix. You need to track down where the screech is coming from? Wheels Drive Belt Bearings Piston rings Or it may be battery operated? ..

It looks like you meant 'Wahl', this is why upper case letters are important for 'proper names' because Spell check won't alter them. Here are the parts diagram and suppliers, including Wahl themselves. https://www.google.com/search?q=wahl+kennel+pro+model+8800+parts+diagram You can safely ignore the answer from the African Prince as he is just copying and pasting from AI Chat GPT4. ..

Here are some steps you can follow: Check the Seals and O-Rings: Release the pressure: Make sure there's no pressure in the cylinder by releasing the pressure release valve. Unscrew the pump: Remove the pump to access the internal components. Inspect the seals and O-rings: Look for any damaged or worn-out rubber seals. Check the rubber seal at the bottom of the tube (where the plunger sits) and ensure it's in place. Examine the one-way valve (usually at the bottom of the tube) and clean it. Lubricate it with silicone grease. Lubricate the rubber washer on the plunger with silicone grease and reassemble it in the tube. Reassemble the pump: Put the plunger back into the tube and lock it with the handle. Test the sprayer: Pump it up and check if it maintains pressure without leaking. Inspect the Handle and Hose: Handle connection: Ensure the handle is securely attached to the cylinder. Hose inspection: Check the hose for kinks, twists, or blockages. Straighten out any kinks and remove debris that might be blocking the hose. Check the Nozzle and Wand: Nozzle adjustment: Adjust the nozzle to the desired spray pattern. Wand inspection: Examine the spray wand for clogs or obstructions. Lubricate O-Rings and Seals: Apply silicone grease to the O-rings, seals, and other moving parts to ensure smooth operation. Test the Sprayer: Fill the cylinder to the desired level (avoid exceeding the maximum fill mark). Screw down the pump firmly to create an airtight seal. Manually operate the pressure release valve to ensure it's working.

As a customer, the advantage is that I don't have to drive to the florist. Saves time and gas. I could make a phone call, but then I wouldn't see the available flowers.

The transportation ring on a Husqvarna chainsaw is a small metal ring that is sometimes fitted onto one of the bolts when the saw is new. Its purpose is to prevent the chain from rotating during transportation or storage. If your chainsaw has this ring, you should remove it before using the saw. Keep it in a safe place so you can use it again if needed. If you're looking for more information about Husqvarna chainsaws, you can refer to the operator's manual for detailed instructions. https://www.manualslib.com/manual/3145215/Husqvarna-440.html