Tascam Audio Players & Recorders - Page 3 - Recent Questions, Troubleshooting & Support

I JUST REINCERT THE CART AND SORKED AGAIN??

I had the same issue on my 2488neo. What I found that worked for me, was during the mixdown, make sure the solid levels on the right side of the mini screen are at the top of the black line, don't worry about it sounding too loud. After your mix down is done, pick a mastering tool that best fits your style of music, during this process any levels that go over peek will be eliminated. Once your mastering is done, burn a CD, but don't finalize the CD, so you can use it again to keep checking if the volume does not match that of a regular CD (a known band CD from the store) this worked for me, hopefully it will for you as well..

This is a common oversight by the recordist (you, inthis case). Put the CD back in the recorder, and access the recorder's menu. Look for 'Finalize disc' or Finalize recording'. Select this option, and wait the machine to prompt you to remove the disc. Finalizing the recording is what encodes the new recording disc to your geographical location's standards. Once disc is finalized, it will play in any playback disc drive in the same geographical region as the one you are in.

You assign the effects basically the exact same way you assigned the channels to inputs, except you press and hold the "MICX4" button and press the "Select" key to the channel (or channels) you want to assign the effects to. Once you assign the effects to the channel, you can edit to the effect you want, and edit the values of the effect.
Good Luck!

make sure that the disc is not a dvd recorded disk instead of and audio disc