Shark Vacuums - Page 5 - Recent Questions, Troubleshooting & Support

It is probably clogged

There might be a shortage in the cable or plug....

The indicator light flashing purportedly usually means the battery is low or the vacuum is being charged. https://bestvacuumhq.com/shark-vacuum-brush-roll-indicator-light-not-on

https://www.youtube.com/watch?v=p0mhOezbPLo

this is good for ALL Shark appliances, not just the steam cleaner you asked about http://www.sharkclean.com/

What I see most often is the safety switch in the nozzle goes bad. Shark vacuums are considered disposable and they don't sell parts. That doesn't mean it can't be fixed though. Take it to your local vacuum repair shop and have them bypass the safety switch and service your machine.

Just want to order a new charging cord and batteries for our sweeper.

Follow this link. On the right side one half way down should see download here. I started it to make sure it worked. Started fine so I canceled since I have no need. For future reference most of the time you can find manuals by using model numbers etc followed by .pdf Try it using you SHKC7800.pdf to see what I mean. Good luck

First, turn the power off and remove the battery. Then, separate the handheld from the rest of the vacuum by pressing the "Wand Release" button. Next, hold the dust cup over the trash and press the "Empty" button. Tap gently to empty contents and pull any debris off of the metal screen. If desired, wipe clean with a dry soft cloth. Close the lid. You will hear it click into place. For optimal performance, the dust cup should be emptied each time you vacuum and when the dust cup appears full or debris reaches the "Max Fill" line.

I recommend you do not use a steam cleaner on laminate flooring. We bought an O'cedar mop and bucket with a built in spinner to get the majority of the water out of the mop. Make sure to push the spinner foot lever a least 6-7 times. If you still have too much water on the floor, spin it more.
Don't use harsh cleaners. Murphy's Oil soap is good, but not too much or it will be sticky. I like the O'cedar because the mop can be popped off the handle and washed in the washing machine. It snaps back on easily. The bucket has a handle and a place on the bottom that makes it easier to empty.
One note:
I pressed the spinner lever too quickly on my first one and after a while the gear stripped.
They are not expensive and I've found them at the dollar store and Walmart.

You can call shark customer service at 1-800-798-7398 or call your local vacuum repair shop. It might be cheaper to buy one used.

Got hair in and around shaft and bearings. I use a peir of needle peirs. Do not cut hairs or etc. Pull them out.

On page 2: Tip: You can find the model and serial numbers on the QR code label which is located on the bottom of the dust cup. https://www.sharkclean.com/include/pdf/manual-HV300.pdf

Hello, this is Ava with Think Crucial. There are a number of reasons why your brush roller has stopped moving. General maintenance to your vacuum is crucial and will help it work at peak performance. First things first lets focus on the brush roller. Unplug the vacuum and turn it on its side. Look for any noticeable clumps of debris or hair strands that may be caught in the brush roller. Remove these obstructions, probably best to do so with a scissor if it's hair or long pieces of carpet fibers. After removing the debris try manually rotating the brush roller to uncover other hidden clogs. Another thing to take note of is the condition of the bristles on the roll itself. Are they loose or worn down? These are signs that your brush roller is in need of replacing. While checking out your brush roll you might as well take a look at your vacuums belt. Your belt should be replaced about every three months. After regular usage, the belt will stretch out, lessening the tension on the brush roller. Lesser tension diminishes the brush roller's turn rate and speed. If the belt feels loose then it certainly is affecting your vacuums suction as well as your brush roll not moving at all. You can purchase a wide variety of high quality Shark replacement parts for your Shark vacuum direct from Think Crucial with free shipping and an exclusive 10% coupon for Fixya.com readers, use code: FIXYA10 https://www.thinkcrucial.com/search?type=product&q=nv350 I hope this was helpful. Ava B. Think Crucial Customer Care http://www.thinkcrucial.com/

tel:1-800-798-7398 It has a 1 year warranty

If it's 2 years old it's probably worn out. Most Dyson and Shark rechargeables are only good for 2 years. You can check the output voltage with a volt meter.

Take it to your local vac shop for repair. If you do this wrong you will break the plastic tabs and it won't go back together fully.

How old is the battery?

contact Shark cust. sev rie

Hello again Lois Victor, Make and model number always help... Thanks. If you don't have your manual... find them FREE at Shark NV750ANZ Owner Manual or here.. Shark Rotator NV752 Owner Manual or by going to http://poweredliftaway.com/ AGAIN... hope this helps Carnac the Magnificent