Huawei Computers & Internet - Page 5 - Recent Questions, Troubleshooting & Support

Depending what your problem is while trying to update. It’s fairly common that devices today start downloading then the connection is interrupted which in turn corrupts the update. The bad thing about that. Is the data downloaded during the download remains on the device even though it’s not complete. Some devices will not remove the data without doing the one thing we don’t want to do. A full device reset. It’s more hassle than it’s worth. Some however do delete the data simply by turning the device off completely then back on again after around 30 seconds.
If that doesn’t work you may have to bite the bullet and reset the device back to factory again.

Before doing that. Double check that the host server for the updates is up and running. Something like a server crash or poor connection can also cause issues with downloading updates.

Huawei S2700 target the enterprise market, S2300 target at telecom market, but most function are the same, the manufacturer did this mostly for marketing reasons as the telecom market most are big customers with better discount

The forwarding chip does not support statistics on Jumbo frames, so the display interface command on the S5700-SI does not display statistics on Jumbo frames. S5700 Switch Thunder link com

The Huawei MA5800 does not support active/standby mode, but only load sharing mode. The MA5800 has a distributed architecture. When two control boards are configured, the active and standby control boards carry services at the same time to effectively utilize the bandwidth of two control boards. Huawei MA5800 X15

Go in to Settings Menu and then to Lan IP's and change it.

yes just go to a TPG shop and they will set it up for you

Most routers have a reset button, sometimes red in the back to restore to default settings. sometimes there is a small hole where you stick a paperclip into to reset the router also, hope this works...

Yes, you can, but we don't suggest, as Huawei OLT SCUN load balance is not well supported, so most customers are using SCUN in active/standby mode, if OLT lose power, which SCUN will work as the active SCUN will be randomly, which may affect service, also if the link is down, the active SCUN will not shift to the standby SCUN (it will only shift when SCUN board is down), then service may get affected also.

Which model is it? Difficult to guess which you have. There are free online manual that show how to reset, if you provide the model number using the Comment menu.Some routers show a default username and password pasted on the bottom of the router.After a reset, for many Huawei routers, the password is a default of either admin or 3bb and the username is admin.

In version V800R306, the service port cannot be activated or deactivated, but only the user port can be activated and deactivated. For example, to deactivate ADSL port 0/1/0, do as follows: MA5616(config-if-adsl-0/1)#deactivate { portid<U><0,63>'all<K> }:0 Command: deactivate 0 In version V800R307, both the port and the service port can be deactivated. For example, deactivate service port 31, do as follows: MA5616(config)#service-port 31 adminstatus disable Huawei MA5616 DSLAM Access Network Thunder link com

The main difference is HG8245Q2 comes with 2.4G/5G WiFi, HG8546M (GE) only 2.4G WiFi. HG8245Q2 comes with 4GE ports, HG8546M (GE) with 1GE ports

Facing the Wi-Fi issue, then not need to worry. Call Ryan on 1-888-524-2670 (Toll-free). He can definitely solve this issue. I was suffering the wi-fi issue as well. He help me to solve it. Hope you can get some positive response as well. Just make a call because the Number is Toll-Free, so no loss and you can get this issue resolved as well.

Yes. The POS service is a type of data service, which promotes high requirements on network quality. http://www.thunder-link.com/HG8310M_p1091.html