Electric Garden - Page 3 - Recent Questions, Troubleshooting & Support

These Portland brand chainsaws were manufactured for Harbor Freight. Like all Harbor Freight products, getting parts for them is a bit of a challenge, as the products are only available for a couple of years and then no longer manufactured, with parts no longer being available. You can try contacting Harbor Freight and inquiring as to whether parts for your particular model are still available or not. - Contact Harbor Freight Tools 1-800-444-3353 6-6PM PST

Better check with the store or the manufacturer. Hope you still have your bill.

Remove the outer cover and either set it out in the sun or bring it indoors to completely dry out. May take several days. Unplugged rotate the blade once it is dry and then try it. You may have to lubricate any bearings on the motor. Last resort - spray inside the motor lightly with WD40

I could possibly give you a direct link to it if I knew the model and make of the pressure washer. I suggest doing a Google search 4 just the words that contain the make and model number and the word PDF. For instance Husqvarna 3572 PDF

Please give make and model to further assist you.

Height adjustment is done at the wheels. May have extra holes or a slide system. Dont know what you have so guessing since every mower i ever worked on has holes or a slide where you have to press a lever and turn the bar to go up or down.

The GFCI has failed (which is quite common on Chinese electrical) Buy another brand and ensure that it has UL and CSA approval. The power cord on yours states what Gauge wire it is, but it is much smaller.

http://www.fixya.com/support/t24975008-need_wiring_diagram_2002_cub_cadet_model follow this link it should help you

https://www.youtube.com/watch?v=upKX3IPHnLk

https://youtu.be/9hZaGirY4Qs GO here a video on utube https://www.youtube.com/watch?v=9hZaGirY4Qs

https://www.google.com/search?rlz=1CAHKDC_enUS849&q=Where+can+I+buy+an+electric+switch+for+my+dw1251+saw&npsic=0&rflfq=1&rlha=0&rllag=38842072,-104764928,1202&tbm=lcl&ved=2ahUKEwjw-_LpjMriAhVRCKwKHQ9FDQIQtgN6BAgJEAU&tbs=lrf:!2m4!1e17!4m2!17m1!1e2!2m1!1e2!2m1!1e3!2m1!1e16!3sIAE,lf:1,lf_ui:10&rldoc=1

Well apparently Home Depot has in stock. Also I noticed its made by Ryobi who makes Craftsman blowers as well it looks the same or I have 2 of the i give you one https://www.google.com/search?rlz=1CAHKDC_enUS849&q=ere+can+I+buy+replacement+bag+for+gardenline+electric+blower+vac+model+no.20120088/2013&tbm=isch&source=univ&sa=X&ved=2ahUKEwijjfGJi8riAhUBLa0KHVhXA2MQ7Al6BAgDEA0

on bottom there is a plug that hooks the clutch to the wiring harness. unplug it and take the bolt out of the bottom of the clucth. it should fall down by itself. if not a small hammer will knock it loose.

Possibly clean out the attachment points.

Add washers

its an electric not a gas motor 2 stroke oil is for mixing with gas and 4stroke ?

These are fairly simple DC motors. My guess is the bridge rectifier has failed. Here is a YouTube video describing how to check this.

https://youtu.be/F2wI69Stf5Y

Does the motor run?

fixya doesnt sell products try online search