Curtis-Mathis Recent Questions, Troubleshooting Help & Support

Unplug it,then wait 10 minutes,then plug it back in.

I own a One-for-All universal remote, and my booklet says the setup code for a Curtis Mathes TV (without a built-in DVD or VCR) is one of the following numbers: 0030, 0047, 0054, 0060, 0093, 0145, 0154, 0166, 0451, 0702. I can not guarantee these numbers will work with your remote, but it is worth a try.

I have a curtis mathis console tv with a 8track player, casset player record player and a am/fm stereo, mod number on the box is F607 style TC2 seril number 04787814 new in the box never opened. where can i find out its value?

Rebecca,
You should only need to connect the red yellow and white wires to the TV. Make sure your TV is set to the aux input/video input. Sometimes this is a channel, sometimes you have to change the video source. There might be a dedicated button on your remote for this. I believe your TV is only standard definition (non HD).
Greg

any user manual online ? unplug from wall see if remote will get you to system settings audio

The contrast setting controls the relation between the light and black areas of the screen. If the light areas are too bright and are losing details, press the CVOL button; if the picture is gray and lacks contrast, press the VOLB button The brightness setting controls the overall amount of light in the picture. If the picture is too bright, press the CVOL button; if the picture is too dark, press the VOL B button The color setting controls the intensity of color. Curtis Mathes CM19102 Owner Manual Returning To The Factory Settings...

I have a curtis Mathis model number cm19102 . I have no remote. It is stuck on no more than 14 channels. Then the word line comes up on blank screen. How can I get it to get more channels

U have a RCA AV component cable R,Y,W just hook that up for the out for the VCR-out put holes and the other end of the cable R,Y,W just hook it up TV-in input holes.That it,now put TV in Video 1 or 2 and play the VCR- VHS tape.Look in ur Phone book Yellow pages.Tv repair,any tv shops can do the CRT-tv analog tv repair.

If you wish to get some details; check the site linked here. Pull up older posts. Surf the site with patience. http://electronicshelponline.blogspot.com/

Degaussing posistor resistor fail. If you wish to get some details; check the site linked here. Pull up older posts.Surf the site with patience.http://electronicshelponline.blogspot.com/

One cm is ten mm, so 1.1 cm is 11 mm.

Check whether volume is set to Zero. If it is found OK, Check the speaker/s. If found OK; check and replace the damaged component/s at its audio output section circuit board. If needy, replace this board as card basis. If you wish to get some details; check the site linked here. Surf the site with patience. Pull up older posts. Surf the site with patience. http://electronicshelponline.blogspot.com/

Try the link below: http://www.curtis-mathes.com They should be able to help you with the tint on your television not look right. A member of their site should be able to help you with the menu and other problems you might be having, and they do it for free :)

They should have your Curtis Mathes tronics tv/vhs codes at the link below: http://www.curtis-mathes.com

A explanation that may tell you what is happening:Some of their sets had this issue. The picture tube has a metal screen inside directly behind the stripes that make up the phosphor coating on the inside of the picture tube.It is called a shadow mask. It has perforations that line up with all the stripes on the screen (look close--red-green-blue stripes all outlined in black--tiny).What is wrong is not fixable even if the tube is replaced----the metal used in these sets for the mask contains iron which causes it to expand in areas with real bright scene changes--No need to remove question as I saw it and answer questions for most TV area problems.I actually ten years ago worked for Circuit City--saw at least 5 sets (all larger Toshiba sets) with this issue. On seeing first one called our support staff and someone explained to me the issue---that set was under extended warranty and since the customer was angry the set was "exchanged" for a brand new set and the old one was disposed of.

This fault is called one color predominant screen. The cause might be to its video output card itself. There will be some loose solder terminals around the Green video output transistor. Check this card for any loose solder terminals. Just re-solder all the suspected solder terminals by applying a little more solder, without making any solder bridge short in between adjacent solder terminals. This card can be located at the neck of the picture tube [a rectangular board], will be directly plugged on to the back of the picture tube.