Questions & Answers for: workingpro

it is a 230 volt, I want to convert it to 120 volt. D I have to change the transformer or can I rewire the current setup. If you can find a schematic that will answer your question. You can also open ...

SWR WorkingPro 400 watt head - no sound, Preamp Clip red LED is continually lit, Limiter green LED continually lit - fuse is perfect. It worked for a few minutes, then just stopped. Since the PA clip ...

SWR WorkingPro 400 watt head - no sound, Preamp Clip red LED is continually lit, Limiter green LED continually lit - fuse is perfect. It worked for a few minutes, then just stopped. The Preamp Clip ...

I just got this bass and am getting speaker pop at low frequencies, any ideas of what is causing this? All other frequencies sound great. If you are driving the speaker too hard it will pop. This ...

my swr workiongpro 15 suddenly has a very noticable hiss even when the amp is muted, and when I play the high end is more prominent than it was before. If you are having the treble/high turned up ...

I have an SWR workingpro 2x10c combo solid state amp. When running a signal into the standard input with all pots set at 12 o clock, the signal sounds very distorted. I have tried a basic troubleshoot

My new SWR workingpro 12 has a low frequency permanent noise, any idee ? Maybe from the Power supply... Thanks, [email protected] All amps make a small amount of noise (system hiss) but the ...

I need a new power transformer for a swr workingpro 15. I need the datasheet on the transformer. Try the link below to locate your local supplier. http://locator.swramps.com/