Questions & Answers for: Stihl warm hold

warm the way I do when starting it from cold? Starting procedure for Stihl. (cold starting)Place saw on floor (flat clear surface).Make sure chain break is on.Hold throttle in, while pushing

Ad

Question about Ts410 & Ts420 Cylinder & Piston Kit

1 Answer

...Hold cutoff saw firmly.Pull starter handle until saw fires, it should then cut out.Click the starter switch up 1 click to half choke.Pull starter handle again until cutoff saw fires up. note: it will ...

Ad

Question about Ts410 & Ts420 Cylinder & Piston Kit

1 Answer

chain comes loose ms 391 Check the chain tension as you cut. The chain will stretch as it warms up. Be sure the side bolts that hold the bar are snug. Lift the bar upward when you are adjusting the ...

Question about Ts410 & Ts420 Cylinder & Piston Kit

1 Answer

...piston moves. If the saw just falls down the motor is worn. But compression increases as a motor warms up so I don't think this is your problem. If it was the saw would be very difficult to start ...

Question about Ts410 & Ts420 Cylinder & Piston Kit

3 Answers

warm up thoroughly, it is possible that fouled the spark plug and that would serve to make restarting difficult. It would be wise to check the plug and ensure the spark is ok... Make sure the choke is

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Top Stihl Garden Experts

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Kardoc

Level 3 Expert

7503 Answers

ADMIN Andrew
ADMIN Andrew

Level 3 Expert

66974 Answers

Are you a Stihl Garden Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...