Questions & Answers for: valve train noise

Question about 2007 R 1200 RT

1 Answer

...valve train noise. I suspect you have loose valves. Also I would recommend making sure the carburetors are synchronized. If one side is off you will actually feel a roughness in the motor especially ...

Ad

Question about 1990 Legend

1 Answer

valve train noise tapping in top end of motor If the tapping noise speeds up with engine speed, a bad valve lifter.Depending on if it has hydraulic valve lifters.

Ad

Question about 1990 Legend

1 Answer

...valve train. i have changed everything in the valve train but the noise is still there, when the engine is ideling it is very loud, and when im around 2500 rpms i can hear louder. change the exhaust ...

valve train noise, engine oil loss, no leak first porblem was missfire. ignition break down . found distributor shot. bearings had come apart. then it still had bad performance. fokund out cats were ...

Question about 1997 Catera

1 Answer

valve train ticking noise 1997 cadillac catera The cats use hydraulic lifters. Just before your next oil change, or when you are down about a litre of oil, put a litre of transmission fluid (Dextron ...

...3.4 g m loud tapping noise in valves noise in valve train i may say is not from the valve train could be ticking sound if the valve has problem. tapping noise has when the head gasket leak

Question about 2002 XL 1200 C Sportster Custom

1 Answer

rattle noise in head valve train .tappets,lifters...could need adjusting ..hard to say with out hearing it but defiantly valve train. if its in the head.

Question about 2006 B9 Tribeca

1 Answer

...valve train when the motor is just turned on the valve train is very loud. maybe oil pump going bad? That or very worn cam bearings. Or both. Usually if the oil pump is failing you will loose oil ...

Question about 2009 Caliber

1 Answer

...valve train? do I have a timing chain or a belt? sounds like valve train noise in top half of motor engine has 70k on it You may be coming up on the maintenance interval for a new Belt, but I would ...

valve train. if you think it could be in the valve train try this. Add 1/2 can of seafoam motor tune to the oil. Start the car and let it run. If the noise goes away it was a valve train issue. change

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Top Motorcycles Experts

Arnie Burke
Arnie Burke

Level 3 Expert

7339 Answers

Brad Brown

Level 3 Expert

19187 Answers

ADMIN Andrew
ADMIN Andrew

Level 3 Expert

66980 Answers

Are you a Motorcycles Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...