Questions & Answers for: toyota corolla intake manifold

Toyota Corolla GL 90 model RPM goes up every time i hit the break. Look for a valve in the hose connected from the brake master's hydrovac going to your engine's intake manifold . check if it is still

Toyota Tercel How do I get the manifold gasket off of a 1983 Toyata Tercel SR5, 2-wheel drive harchback? remove the exhaust manifold with a 14mm. socket and pull off old gasket, may have to be scraped

...toyota corolla SR5 They have asked my husband and son for help. How complicated is it to do this on this car? What is the process? Is it something that a do-it-yourselfer could handle? it is a pretty ...

toyota corolla 1998 do I have to remove the intake manifold to get easy access to the starter bolts? No. Removal of the intake manifold is not an attractive option. ...That will cost you more time and

need torque specs for 1987 toyota corolla fx-16 head bolt,intake and exhaust manifold? http://opc.mr2oc.com/online_parts_catalog/Engine/torque%20-%20TVIS.gif

...toyota corolla 1.8 sohc p0171 found dirty mass air flow cleaned results the same replaced it 2 days go by and again the same code pops up p0171 fuel fystem too lean bank 1 the down stream o2 is ...

...toyota corolla 1989, it backfires, frequent engine shutdown mostly when the engine is hot but not overheating, i already replace my ignition coil, adjust timing and cleaned my carburetor. Sounds like ...

...Go to http://gorup-sinkovec.net/diy/rattling-noise-in-toyota-corolla-intake-manifold-solved/#comment-375 Follow method described and illustrated by Cobus. Worked a treat for me, took 2.5 mins. ...

intake manifold What's wrong with the intake manifold? Sir!

...toyota corolla, replace cam shaft sensor, crank shaft sensor, could it be the main fuse box it is at the dealer now, wire problem? The Year 1998 Toyota Corolla engine will stall due to: Spark plug ...