Questions & Answers for: tension chain drive

...chain onto water pump drive sprocket. 7. Align right camshaft sprocket timing mark to the timing (plated) link on the timing chain and loosely position over camshaft hub. 8. Verify that all chain ...

Ad

Question about 2000 S-10

1 Answer

...chain tensioner (do not tighten tension bolts). Align the crankshaft and camshaft timing marks with the tab on the timing chain tensioner. Tighten the timing chain tensioner bolts. Torque to: 18 ft ...

Ad

chain tensioner into the right cylinder head. At the right cylinder head, insert a 3 / 8 in. square drive extension with a breaker bar into the intake camshaft drive hub. Rotate the camshaft until the

Question about 2002 Intrepid

1 Answer

...chain tension by pushing the bar away from the drive clutch. Once it is loosened, the bar can be pulled closer to the drive clutch, allowing you to fit the chain back onto the bar -- be careful to ...

Question about 2002 Intrepid

1 Answer

...chain around the water pump drive sprocket. Align the right camshaft sprocket timing mark to the plated link on the timing chain and loosely position the sprocket over the camshaft hub. Verify that ...

Question about 2002 Intrepid

1 Answer

...a new chain, the chain tension has to be checked frequently until the chain is run-in. Check the chain tension regularly. A correctly tensioned chain ensures good cutting performance and long

...drive. Install the oil pump chain and oil pump sprocket. Torque the retaining bolt to 14-16 ft. lbs. Install the right timing chain guide. Torque the retaining bolts to 14-18 ft. lbs. Install the ...

...assuming you are saying that the Drive Chain is "SKIPPING", inside the Drive Chain, there is OIL and a External Chain Tensioner. Adjust the Chain Tensioner to take care of your Problem of

...chain. Most drive chains will be tensioned by loosening one of the gears and sliding it in the direction of tension and retightening the bolt. Some chains are equipped with a tensioner that will ...

...tension it again. 27. Install upper and center toothed belt guards. 28. Install tensioner for serpentine belt. Tighten to specification. 29. Install serpentine belt. When installing serpentine belt, ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

Top Cars & Trucks Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

john h

Level 3 Expert

29494 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

7339 Answers

Are you a Cars & Trucks Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...