Question about SRPD442 42 in. EDTV-Ready Plasma Television
...Sylvania SRPD442 when I turn it on for a minute it goes to standby mode, what you think the problem could be? This could be anything but is more than likely a problem in the power supply or control ...
Sylvania SRPD442 no picture I have sound but no picture on my Sylvania SRPD442 plasma screen. Your problem is probably in the power supply as theres a voltage called the sustain voltage that is always
Question about SRPD442 42 in. EDTV-Ready Plasma Television
Sylvania SRPD442 42 in. EDTV-Ready Plasma hi! i found this site however I couldn't find any information about my particular problem or model. I have a Sylvania SRPD442 42" that I just bought a few ...
Question about SRPD442 42 in. EDTV-Ready Plasma Television
Sylvania SRPD442: picture has lines and particles in it, can't make picture out The screen is not cracked as can be seen with the eyes but has vertical lines and particles in it and you can not make ...
Question about SRPD442 42 in. EDTV-Ready Plasma Television
Where do you hook in the cable connection I can't find the cable connection on the tv and the set (used) has no manual. There is no cable connection. This set is a monitor and you need cable or ...
Question about SRPD442 42 in. EDTV-Ready Plasma Television
where is the cable antenna hole? There is none, you need to use a cable or satellite box with this TV. It's a monitor with no tuner.
Question about SRPD442 42 in. EDTV-Ready Plasma Television
Is my ILO 42" "EDTV" plasma ready for just a regular antenna? Is my 42" ILO Plasma (non-hdtv) digitally ready No, it doesn't have a digital tuner. If you want to watch digital channels you will have ...
Question about SRPD442 42 in. EDTV-Ready Plasma Television
my sylvania monitor is say format not suppoted when i connect it to my mac You did not specify Mac model nor connection cable. Let me make a stab at it. ED means this is a 480-line interlaced or ...
Question about SRPD442 42 in. EDTV-Ready Plasma Television
i need to connect my cable but i can not find the input in the tv It should be on the back of the tv near the middle. See the instructions at the following link: http://www.sylvaniaconsumerelectronics
when you start light turns green but go's back to red . sylvania 6842thg DOES THE TV STAY ON ??DOES IT TURN OFF?...MOST CASES IS A FAILURE IN ONE OF THE POWER PROCESSING BOARDS..WHICH MEANS THAT HAS ...
Usually answered in minutes!
2,410 Questions
2,254 Questions
1,646 Questions
1,423 Questions
1,438 Questions