Questions & Answers for: subwoofer channel working yamaha rx

Hook-Up for Paradagim Subwoofer-SB-100 The manual does not describe the best way to hook this device up. The manual shows a single jack for the subwoofer. The Paradagim Sub has a left and right input ...

...yamaha rx-v659 keeps shutting off soon as you turn it up half way i have change all the speaker wire twice in case it was shorting out tried different speakers and it is all hooked up right I had the ...

Center channel drops once unit warms up Once the unit has been on for 15 to 30 minutes the center channel looses all sound. You don't have an external amlifuer, do you? You could hook the pre-amp out ...

Subwoofer won't work after Auto Setup I have the RX-V659 which is very similar to v661. After the auto setup, the subwoofer (Polk PSW404) will not work. During the auto setup, the sub works fine. I ...

...audio outs on yamaha v659 use the front pre-outs located immediately over the red "right" A&B speaker connectors in the rear of this unit. connect with a high quality stereo gold plated rca

is rx-v659 compatible with new ipod dock YDS-11 or do I need to find a YDS-10 older model. THANKS Both docks will work with your receiver. Dank

...Yamaha RX- V659 I plan on buying Airport Express and connecting it to my Yamaha RX-V659 receiver using a mini jack to double RCA cable. Not sure which input to use on the receiver. Since you're using ...

...subwoofer playing). When it did this it would make the same clicking sound the receiver does when it powers on. The other channels still work. At first I thought that the amplifier fried, but the ...

...channel). On the front display it shows all channels highlighted except the subwoofer but does show the LFE. I think I have a wrong setting or combination of setting but cannot work it out. It sounds ...

...to my rx-v371 you can connect Yamaha YST SW800 at the back of your receiver ( label =subwoofer ...