Questions & Answers for: Chevrolet step 2

...step 2 = additional 70 degrees. crankshaft damper bolt = 74 ft. lbs. crankshaft oil deflectorbolt/nut = 27 ft.lbs. cylinder head bolts = step 1 = 15 ft. lbs. step 2 = additional 73 degrees. (tighten ...

...Step 2 Additional 73 Degrees 5.0L & 5.7L 2-Bolt Main 77 (105) 4-Bolt Main Inner 77 (105) 4-Bolt Main Outer 67 (90) 4.8L, 5.3L and 6.0L Main Bearing Cap Bolt/Stud Inner Step 1 15 (20) Step 2 ...

...Step 2: Short bolts: 43 ft. lbs. Step 3: Long bolts an additional 90 degree turn Step 4: Short bolts an additional 90 degree turn ② Center bolt spec shown; Pulley-to-hub bolts: 37 ft. lbs. ...

...Step 2 - 45 ft.lbs Step 3 - 65 ft.lbs Apply sealant to head bolt threads. Lower intake Step 1 - 27 inch lbs Step 2 - 106 inch lbs Step 3 - 133 inch lbs Upper intake Step 1 - 44 inch lbs Step 2 - 88 ...

...step 1, 25 ft-lb step 2, 45 ft-lb step 3, 65 ft-lb bolt tightening pattern front of vehicle is on left just for referance. 13 5 2 10 17 9 1 6 14 16 12 8 4 3 7 11 15 i hope that makes sense and

...4.3 torque sequence and settings for intake manifold lower intake manifold step 1 27 inch lbs. step 2 106 inch lbs. step 3 134 inch lbs. upper intake manifold step 1 44 inch lbs. step 2 80 inch

...Step 2 2 Important: It will say Theftlock® on the face of the radio. Does the Radio have Theftlock? -- Go to Step 3 -- 3 Is it possible to get the security code from the customer? -- Go to ...

...Step 2: 106 inch lbs. (12 Nm).         Step 3: 11 ft. lbs. (15 Nm). Fig. Lower intake manifold bolt tightening sequence-5.0L and 5.7L engines / zoom image link ...

...Step 2 NO - Go to Diagnostic System Check - Lighting Systems in Lighting Systems. 2 Turn the ignition to the ON position. Turn the headlamp switch to the ON position. Turn the I/P dimmer switch to a ...

Step 2 Go to Radio/Audio System Description and Operation 2 Turn ON the ignition, with the engine OFF. Turn ON the radio. Does the radio operate normally? Go to Testing for Intermittent Conditions and