Question about 1998 Chevrolet Astro

1 Answer

Looking for the torque specs for 1998 chevy astro van?

I am rebuilding an engine for my boat, it is a chevy astro engine and I need the torque specs.

Posted by btyboop1821 on

  • 7 more comments 
  • btyboop1821 Dec 28, 2008

    Thank you very much this is exactly what I needed. Ill let you know how it works out.

  • Anonymous Mar 12, 2014

    2kd engine torque specs

  • Anonymous Mar 12, 2014

    2006 .petrol

  • Anonymous Mar 13, 2014

    torque specs for 1998 chevy astro van intake manifold

  • Anonymous Mar 15, 2014

    engine torque specs

  • Anonymous Mar 19, 2014

    i made overhol to my car engine and i whant to rebuild the parts again .iwant the wright torques fo tighting the parts

  • Anonymous Mar 21, 2014

    Not charging need a diagram

  • Anonymous Mar 30, 2014

    Where is the abs module and how do I replace it on a 2004 chevy astro van?

  • Anonymous Mar 30, 2014

    Spark plug torque specs for 01 kia sendoa van

×

Ad

1 Answer

Anonymous

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 379 Answers

1998 chevy astro 4.3 v6 torque specs include :
* foot pounds *
balance shaft (if equiped) gear bolt = step 1 = 15 ft.lbs. step2 = additional 35 degrees.
camshaft sprocket bolt = 18 ft. lbs.
connecting rod cap = step 1 = 20 ft. lbs. step 2 = additional 70 degrees.
crankshaft damper bolt = 74 ft. lbs.
crankshaft oil deflectorbolt/nut = 27 ft.lbs.
cylinder head bolts = step 1 = 15 ft. lbs. step 2 = additional 73 degrees. (tighten in sequence)
Looking for the torque specs for 1998 chevy astro  - 2811243.jpg


exhaust manifold bolts = step 1 = 11 ft. lbs. step 2 = 22 ft. lbs.
flywheel bolt = 74 ft. lbs.
main bearing cap bolts = step 1 = 15 ft. lbs. step 2 = additional 73 degrees.
oil filter adapter bolt = 15 ft. lbs.
oil pan bolt/nut = 18 ft. lbs.
oil pump bolt = 66 ft. lbs.
rocker arm with press in studs = 18 ft. lbs.
rocker arm with screw in studs = 19 ft. lbs.
valve lifter retainer bolt = 12 ft. lbs.
water pump bolt = 33 ft. lbs.
* inch pounds *
balance shaft retaining plate bolt = 106 in. lbs.
camshaft retainer plate bolt = 106 in. lbs.
front cover bolt = 106 in. lbs.
intake manifold upper = step 1 = 44 in. lbs. step 2 = 88 in. lbs.
intake manifold lower = step 1 = 27 in. lbs. step 2 = 106 in. lbs. step 3 = 133 in. lbs. ** (tighten bolts in sequence)

thanks for your vote !

Posted on Dec 28, 2008

  • mbaldwin5 Aug 01, 2011

    Where do you rent a torque angle meter to complete step 2 on the head bolts?

×

Ad

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Torque settings for chevy spark b12d engine . Please


Torque Specs
These specs may not be correct for your application.
Verify your engine specs with a service manual for your year and model

Small Block Chevrolet V8 Engine Specs Torque Specs Cylinder Numbering...

Nov 27, 2015 | Cars & Trucks

1 Answer

Installing a used engine in my boat


This is a random choice for your engine.
You would really need the model and probably the serial to get the correct specs.
The Perkins Model AD3.152 engine used in Massey Ferguson 135 tractors built between 1968 and 1975 had the following torque specs.
45 hp
1211 ft pounds of torque at 1300 RPM
Max RPM was 2000

Feb 16, 2013 | Cars & Trucks

1 Answer

Need torque spec for a 1998 3.1 litre chevy v6


Hi there:
Are you refer at engine torque specf? Please confirm us.

Aug 10, 2012 | 1998 Chevrolet Malibu

1 Answer

TOYOTA HILUX 2006 engine head torque specs


it depends on the size of the screws. i recommend to set torque as 100lbs for new bolts, 90 for old bolts

Feb 29, 2012 | 2006 Toyota Hilux 3.0

2 Answers

Want to rebuild a chevy v-6 4.3L engine from disassembly to reassembly


Check out faxonaitoliterature. They carry original dealer service manuals. They also list a manual called "Rebuilding a Small Block Chevy". It should have everything you need to know. Hope this helps.

Dec 26, 2009 | 1988 Chevrolet S-10

Not finding what you are looking for?
1998 Chevrolet Astro Logo

3,850 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

Marvin
Marvin

Level 3 Expert

85239 Answers

john h

Level 3 Expert

23504 Answers

Joe Taylor
Joe Taylor

Level 3 Expert

2228 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...