...steam coming out. My iron heats up fine - the generator turns on and the light show that the iron is ready for use. When I push the stem button on the iron it clicks but no steam comes out. take down ...
...iron and letting it heat up and produce steam. The tank was not overfilled. The controls were set to high steam and heat setting 5. A shirt was being ironed and when the shirt was being readjusted on ...
...Iron wont produce steam. IT heats up MY rowenta Iron wont produce steam. IT heats up and everything fine, but no steam. Sounds like the Steam control valve is blocked or not opening. try cleaning the ...
...steam iron according to the manufacturer's instructions. Your iron is more likely to leak when it has not been cleaned properly. Plus, the water that leaks from a steam iron that hasn't been cleaned ...
...IRON - NO STEAM !!!! THE ROWENTA STEAM IRON HEATS BUT THERE IS NO STEAM , THIS IS A REATIVELY NEW IRON I HAVE ONLY USED IT FOUR TIMES , WHAT IS WRONG THE IRON HEATS BUT THERE IS NO STEAM. PLEASE HELP ...
Question about Commercial Garment Steamer - White
...STEAM GENERATOR IRON does not provide steam My MORPHY RICHARDS 42256 JET STREAM STEAM GENERATOR IRON has stop producing steam. I have changed the filter and although it heats up, it does not produce ...
Question about Commercial Garment Steamer - White
...Steam Iron is letting out lots of water with the steam Why/ When pressing the button on the Iron for steam lots water comes out with the steam soaking the garment see this steps and fix it. God bless ...
Question about Commercial Garment Steamer - White
steam gen iron is faulty , when I press the steam button it pours with water from the metal plate part of the iron , any ideas ??? Thanks If the iron heats but steams improperly, inspect the soleplate
Question about Commercial Garment Steamer - White
...iron heats up but no steam comes out ....help. If the iron heats but steams improperly, inspect the soleplate and clean the vents and flush sediment out of the steam chamber. If the iron produces too ...
Question about Commercial Garment Steamer - White
Steam generator iron not allowing steam to vent. Water heats in holding tank to 212+ degrees F, and sole plate heats up but no steam comes out. could the line be clogged. It's a Shark G6200 Try ...
Usually answered in minutes!
202 Questions
119 Questions
145 Questions
74 Questions
82 Questions