Questions & Answers for: spread brake calipers

Question about 2004 FLHT - FLHTI Electra Glide Standard

1 Answer

...spread enough to reinstall. Then pull the two smaller bolts from the caliper and the pads will fall out. The pads are different for inside and outside, so pay attention, and remember, after ...

Ad

Question about 1998 V70

2 Answers

...brake. They retract just like the front caliper pistons. You can push them in by hand although a tool to spread the pads apart is quicker. You have to grab the caliper and rotate with some force to ...

Ad

brake caliper to spread open so that the new brake pads will fit back on the rotor. Is there a special tool I need to compress this caliper? Hello, normally a C-clamp is used to push the caliper back,

...brake caliper will not spread open. trying to change brake pads The front calipers compress in but the rears screw in - you need a caliper piston tool. Order a good one from www.GermanAutoParts.com - ...

Question about 1996 Grand Cherokee

1 Answer

...you need to spread the brake pads from the rotor with a screw driver, if the caliper doesn't move, open the bleeder valve and spread the pads from the rotor, then you will need to bleed that ...

Question about SSR 110CC Pro Beginner Bike

1 Answer

...brake cable from one side, this should allow the calipers to spread fully. Now, install the wheel/tire into the calipers. Next, move the tire/wheel assembly around to get enough play to squeeze the ...

Question about 2008 Grand Caravan

1 Answer

...to use the same method to spread the calipers. Do you know the trick to collapsing the calipers on the rear breaks on a 2008 Dodge? u need a tool to that they turn in bc the emergency ...

Question about 2000 Alero

1 Answer

...SPREAD THE CYLINDER INSIDE WIDER TO ACCOMODATE FOR THE NEW BRAKE THICKNESS! YOU CAN DO THIS BY LOOSENING THE ZERK FITTING JUST ENOUGH TO PUSH THE CYLINDER IN WITHOUT LOSING ALL THE BRAKE FLUID! SET ...

Question about 2002 Grand Prix

1 Answer

brake pads 2002 pontiac grand prix Remove wheel, remove the two bolts in the calipers, spread and lift off calipers, remove pads compress caliper piston with a c-clamp, be sure to have the brake fluid

Question about 2003 FLHR Road king

2 Answers

...the weak lever. Remove caliper from the fork leg and clean pistons with a brake cleaner. Spread the pads back apart and reattach caliper to the mount. Pump the lever and you should be good to

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Top Motorcycles Experts

Arnie Burke
Arnie Burke

Level 3 Expert

7339 Answers

Brad Brown

Level 3 Expert

19187 Answers

ADMIN Andrew
ADMIN Andrew

Level 3 Expert

66967 Answers

Are you a Motorcycles Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...