...speaker of lower power than the amp or ohms than it. The simple way to cut out rumble is at the amp by reducing the bass, however most amps will cut all the bass and not what you want. Another way is ...
...Speaker placement, eg have the speakers beside you and facing away to the audience. Stand further from the speakers. Use an eq pedal and lower the gain around the resoant frequency. Use a ...
Question about Dean EXotica Quilt Ash Eqab Acoustic Bass Guitar New
...just get feedback when we turn the volume up. any ideas? thanx! Proper placement of mics versus the speakers of a PAS is important to avoid feedback. Your speakers need to be toward the audience from ...
...Instructions1Place your mixer in a location that will allow you to hear the sound coming from the speakers clearly. The best placement is opposite the speakers, centered between the left and right ...
Question about Frontman 212R 100W 2x12 Guitar Combo Amplifier
...at 5 and was using an RP500 and still I had someone at the bar tell me I could not be heard. What is up with that? speaker placement, might have to try some different locations or tilt back a
Usually answered in minutes!
297 Questions
192 Questions
155 Questions
161 Questions
136 Questions
