...protect mode. hope this helps check to see if you put the correct fuse in the receiver, and if it is the correct one, you will need to check the protection circuit because with it being turned up so ...
Protect Mode Goes into Protect mode at different intervals. Opened up component and cleaned out. Also noticed that if the receiver is on and not in Protect mode, that with the cover off if you push ...
str de345 shuts down after a few and flashes (protection) on face of amp. The Receiver is going into protection mode and possible some speaker cable might have touched the body or with each other. ...
protect shows on display. turned off then back on did not help If the unit goes into this mode immediately, it suggests that the output transistors are shorted. This is a common problem that is easily
sony str de345 in protect mode If PROTECT , PROTECTOR or a P is flashing in the display of the A/V receiver, there may be an incorrect connection or an improper setting. Try following these steps to ...
protect. Your device has went into protection mode, an internal malfunction causes it to shut down in order to protect itself.Somtimes a physical reset will help.Turn of and unplug device fro a couple
Usually answered in minutes!
6,442 Questions
5,455 Questions
4,073 Questions
2,449 Questions
2,268 Questions