Questions & Answers for: replace pickup coil distributor oldsmobile

...pickup coil.( The 2 wire sensor in side of your distributor. The The igniter will not allow the coil to fire with out reference form the pickup coil. Coil has primary and secondary resistances. when ...

Ad

Question about 1988 Delta 88

1 Answer

...coil, and rotor. Is their anything else. Could be a module or the pickup inside the distributor. You get the module tested at most auto part stores to check the pickup you need a voltmeter(ohmeter) ...

Ad

...operating temp. Don't have clue I replaced coil pack, ignition module, oxygen sensor,crankshaft position sensor, fuel filter and fuel pump. i'm stumped? Please help? could be pickup coil in ...

Question about 1988 Grand Wagoneer

1 Answer

...pickup coil in distributor along with pickup points. I've also cleaned all points in the distributor cap and tested the plug wire leading from the coil to the distributor cap. its working fine but ...

...replace distributor if pickup coil is bad. have your already check the high tension wire and the distributor cap maybe the contacts have corrosion in it. Try cleaning it with a sand paper of the ...

Question about 1994 Camry

1 Answer

...replace the ignitor, then mostly likely it's the pickup coil or ignition coil...buy the whole  distributor (~130$ comes w/ pickup coil and ignition coil) at your nationwide auto parts store...my ...

...PICKUP COIL IN THE DISTRIBUTOR, IF YOU HAVEN'T CHECKED THAT, IT IS PROBABLY EASIER TO CHANGE THE DISTRIBUTOR THAN TRYING TO CHANGE JUST THE PICKUP COIL. MAKE SURE THE PICKUP COIL COMES IN THE NEW ...

Question about 1983 Accord

2 Answers

...pickup coil, They should replaced as one repair. While you are into the system you might as well replace the distributor cap and rotor. Also check for white colored deposits at the coil lead which ...

...pickup coil igniter rotor buton wires cap coil fires plugs wont I had to replace the magnetic pick-up sensor on the side of the distributor that tells the coil when to fire on my 86 truck. It was $80 ...

...replace the ignition pickup coil on a 1997 GMC truck with a 5.7 A 1997 model should have the cam sensor mounted in the distributor with the plug on the side. Its held in with two screws. The older ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

Top Cars & Trucks Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

john h

Level 3 Expert

29494 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

7339 Answers

Are you a Cars & Trucks Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...