...REPLACE LAMP AND STILL BLACK SCREEN AND CLICKING SOUND Changed lamp and picture stay on for 1 1/2 min then video go out then audio follow. This is a Samsung DLP HLR 50 67WX/XAA,Is this an overheating ...
...the fan is right there in the open to the right behind fan #2 (the larger fan). Just replaced fan 3 on hln467wx lookin in the back 1 on the right blows into big fan towards bulb easy to ...
the tv says 'check fan #2. samsung dlp model # hln437w/xaa Everything you need to know is right Here http://www.jangro.com/a/2006/09/29/samsung-dlp-how-to-replace-fan-2/
...do to fix it? It is Samsung Model # HL-S5086WXAA Hello, fan 2 is the fan which cools the DMD module. I think your problem is Light engine.Replace light engine. Dont forget to Rate! Good luck ...
...Fan #2" on-screen message appears before shutting off. How do I fix this? Look at the Large Lamp fan and if it is not rotating it is bad and needs to be replaced. If is ok then check the other two ...
#2 fan is not working My #2 fan on DLP is broken, can I replace it myself? Were do I buy the part? search google and ebay
...and can I get to the fan to replace it in the same location as I got to the lamp. Normally the fans (either 2 or 3) on these don't go bad. Usually increased fan-type sound comes from the color
...fan so i can replace it, thanks. Fan #2 is the fan that blows air accross the lamp itself. It sits in the far upper right corner covered by a shroud. The ONLY way to remove the fan is to remove the ...
turn on and says "check 2nd fan" Thats indicating that the number 2 fan needs replacment. You can get the fan for your model from www.tvrepairworld.com under the Samsung cooling fan category
Usually answered in minutes!
2,410 Questions
2,254 Questions
1,646 Questions
1,423 Questions
1,438 Questions