...cable from the battery while the engine was running and the engine kept running. With the battery connected and the engine running the mechanic says he only measures about 12 volts on the battery ...
2001 mazda mpv, we took it to the dealer who quoted us a fairly low price of $500 for repair. After a week, they upped it to around $3000. We were stunned, then they started the 'you should just trade
battery (-) negative cable for 30 seconds and reconnect. If the engine light comes back on then you need to have the computer scanned. Some auto parts stores do this for free and mechanic shops charge
...battery cable. With the vehicle in neutral, position it on a hoist. Remove the splash shield. Rotate the accessory drive belt tensioner clockwise for 2001-2004 models and counterclockwise for ...
...battery cable, thereby taking the battery out of the circuit, with the engine running can cause the alternator to charge full tilt and destroy sensitive micro volt (computer controlled) components; ...
...replacing your your MAP sensor. Just be sure to disconnect your negative battery cable before you replace the sensor. If you do not do this you may short out the new sensor. I hope this helps you
Question about 2001 MPV
...remove negative battery cable for at least 15 seconds replace the cable this should reset the system depending on which function is activated you may have to consult the manufacture of the alarm ...
Usually answered in minutes!
4,236 Questions
3,749 Questions
3,350 Questions
3,279 Questions
3,219 Questions