...be on the fritz. I think it is a dead battery in it. Can you try to find out what I have to do to replace the battery? very simple pop the back off the remote and replace
...of the fob. Place the screwdriver in the notch and pry the two half apart. Then remove the battery and replace with one of the same. You can pick one up almost anywhere small batteries are
Battery Light came on - the car shut off briefly (wheel went hard) car came back on light remained on Hello and welcome to FixYa! If the battery light is on, I strongly suggest that you have the ...
battery light on after alternator replacement replaced the alternator today after a few weeks of hard starts, now im getting a battery light that comes on. my car has about 66k miles on it, not sure ...
replace battery on 2005 chrysler town and country key I have a remote key for my 2005 Chrysler Town & Country. The signal is getting weak and the battery needs to be replaced. How do I replace the
Question about 2005 Town & Country
How do I replace the key battery on my 2005 Chrysler Town and Country? I have a remote key for my 2005 Chrysler Town & Country. The signal is getting weak and the battery needs to be replaced. How
Question about 2001 Town & Country
battery is dead will jump over is this the computer or just a battery? Personal mechanic said it's the computer. A Chrysler tech said because it will jump and there is no check engine light it
Question about 2006 Town & Country
Car died replaced battery died again after 2 days. Possible cause? My car died in an intersection. I checked the battery and saw considerable battery acid build up after only one month since I last ...
Question about 2008 Town & Country
08 towwn and country keyfob stopped working ,replaced battery,battery shows 2.9 volts.also want to program 2 new fobs with one existing fob.any solutions ? keyfob not working I had one go bad on a ...
Question about 2000 Town & Country
the belt could be too loose, or the alternator needs a new regulator or the alternator needs to be replaced. Also check your battery terminal connections for corrosion first, to see if that helps. If
Usually answered in minutes!
1,229 Questions
1,289 Questions
1,079 Questions
746 Questions
666 Questions