Questions & Answers for: repair technics cd disc display

...cd changer the disc changer ,u plug it in and it s display reads checking disc.and wont do anything elsce 2.the first time i could use the disc phone pad ,then it read error. 3.i have never used this ...

...repair the system. Not booting Laptops: 1. Unplug Ac power cord and take out the battery 2. Press and hold power buton for 25 secs (yes without cord and battery) Desktops: 1. Unplug Ac power cord 2. ...

...a software to run this CD Rom. What can I do to get it operating again. I have the Power DVD Cyberlink installation disc but since the CD Rom cannot detect anything I can not reinstall this

...Technics still support this player? Replace the small drive belt on the inside cover back left of the unit. It's easy to do - just a tight space. Take the old belt, which looks like a rubber band, to ...

...CD which you can copy to a floppy disk ready to be installed. If you are not sure how to do this then please read your motherboard manuals for more information [Note : if you do not have Raid Drivers ...

...Cd drive display shows "no disc" everything else on the unit works, tape deck, volume, etc. Thanks for your help Bill P. Hi, Your no disc error can be a DIY like the following ...

cd disc into the player and press play. The screen display no disc. Hi Jeffry, Try these basic steps below to solve your problem. You should prepare tools and test instrument like multimeter. Assuming

no disc display This can be caused by many hours on the unit or a bad solder joint on the PCB. It will need to be seen by a repair Technician.

TECHNICS SL HD81 5 CD MULTICHANGER. The multichanger, when a disc is put into any of the five slots, doesn't sound like the disc spins - almost as soon as the draw is closed, NO DISC appears on th

...repair shop and have them update the firmware. They should have received a DVD with an update program on it. You could try 136900 if you can enter it, but I doubt it'll work. There is a Volvo ...