Questions & Answers for: Canon removing glass

Question about CanoScan 9900F Flatbed Scanner

2 Answers

removing the glass ( no screws visible). How do I get to the underside of the glass? I would not worry about the underside of the glass unless you are having problems. The focal length of the ccd that

Ad

Question about CanoScan 9900F Flatbed Scanner

3 Answers

Cleaning Canoscan 9900F glass Hello. Could you please describe the procedure for removal of the glass (or is it perspex) from the Canoscan 9900F in order to clean it both sides. I have had it done ...

Ad

Question about CanoScan 9900F Flatbed Scanner

2 Answers

Failure to print properly I cannot get my Canon copier to print copies darker. Is the machine a digital machine? If so there is a slight chance that the reason for the problem is that the mirrors are ...

Question about Pixma MP800 All-In-One InkJet Printer

1 Answer

...glass sheet itself. The easy part is the beginning, removing the scanner cover. Next you will have to locate screws around the outside and start taking panels off. Keep note of the panels and the ...

Question about PIXMA MP830 All-In-One InkJet Printer

1 Answer

How do I clean the INSIDE glass/platen? The inside of the platen is dirty and needs cleaning. How do I open the scanner portion to clean the glass? You mean the inside of the scanner glass? (The ...

Question about DR-5060F Pass-Through Scanner

1 Answer

...glass. First you need to remove the scan module by removing two screws on each side, then remove the cable. Carefully take out the module. You will notice 4 small screws in the side, after removing ...

Question about imageRUNNER 1023iF Black and White Copier

3 Answers

platen glass dirty clean platen glass user modecommon settingsadditional functions13. adf dirty errordisplay(default) / do not display If you are getting this message when running copies it simply ...

Question about CanoScan D1230U Flatbed Scanner

1 Answer

lHow to clean under side of glass plater note where the dirt is located,unplug all wires from back, remove top hinged cover, undo 2 screws at the top, remove cover plate by gently tipping toward top, ...

Question about imageRUNNER 8500 Copier

1 Answer

how to removed error E000202-0000 for ir 5800 unplug the copier .remove copyboard glass,slide scanner towards right side, under copyboard glass on left side rear corner there is a black sensor which ...

Question about DR-9080C Path-Through Scanner

1 Answer

...the LED module is not disturbed. While removing the glass, you need to keep the module 'glass-up' and unscrew the side catch, gently replace the glass and refix it. S. Mohan, Chennai, ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Top Canon Office Equipment and Supply Experts

old marine
old marine

Level 3 Expert

2426 Answers

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Cindy Wells

Level 3 Expert

6688 Answers

Are you a Canon Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...