Question about X1150 All-In-One InkJet Printer
...colour, will not print in red The printer does not seem to print in red, mostly greens and yellows, any advice gratefully received. Thanks. That happens to me when my ink cartridge is running low ...
...red ink This is normally caused by the PC unit (photo conductor unit) you will see four of them sitting on the inside of the front cover if you open it. To check if this is the problem you can swap ...
...Lexmark Z617 has a new Colour cartridge (27) but it is not printing in red. Take the cartridge out to make sure there is no residue from the blue tape that you removed. Then try this cleaning
red colour not printing i have a lexmark x1270 and its not printing the colours correctly there is no red colour being printed i have installed a new cartridge and its still the same can you help ...
...colour cartridge, but its showing empty. have a new black one installed but now only printing in red Try to remove and reinstall Ink Cartridges while printer is ON. Be sure the it is lock in place on ...
Question about X1290 All-in-one Inkjet Print Printer
...red print Just replaced the colour cartridge as the old one would not print yellow. New one worked once. Have reinstalled driver from Lexmark's own site for Vista. Now only printing red. Now fixed. ...
...red horizontal bands across my colour prints, even on the best setting. I have cleaned the head and contacts and carried out alignment, but no improvement. Any ideas? Hi, If you have tried all that ...
Question about X6570 InkJet Printer
When I try to print full colour photos the colour is off, there are lines and red streaks Please try to make a Color Copy and let me know if it works Fine?
...colour red my Lexmark x2760 wont print colour red Make sure the magenta cartridge is not empty. If it's not, then try the print head cleaning function in the printer utility window. In "Devices and ...
...colour red I have inserted a colour cartridge in my Lexmark x2670 all in one and it doesn't print colour red. You most likely need to go into the maintenance menu on your printer and perform a nozzle ...
Usually answered in minutes!
1,487 Questions
1,353 Questions
1,277 Questions
961 Questions
741 Questions