Questions & Answers for: put on brush cutter

...put in some liquid soap, and some hot water. I would think that would loosen anything that was compressed or stuck. It might take a few times, but that's what I would try....or you could order a new ...

...BRUSH CUTTER OFF FS 55 WANT TO ATTACH GRASS TRIMER Look at the top of the head (where the brush cutter is) find the small hole about 3/16 diameter. Insert an allen wrench or a large nail, or anything ...

...put stickers in the shredder between two layers of 3-4 plain paper sheets. That's for future. Now I would suggest getting some "Label Off", "Label Killer" or similar spray product, that will dissolve ...

...Ryobi Brush Cutter. Replaced spark plug but still no spark. If the spark plug you have put in has the correct gap then u will next have to check or change the HT lead Change it if no spark is ...

...brush cutter head to install the string trimmer, I had forgotten to put on the flanged washer before I put on the arbor. Now I can't get the arbor off as the gear just turns when I try to unscrew it. ...

...brush cutter That only runs with the choke on.When I put the choke half way it revs up and then stalls.I have pulled the cleaner off,cleaned the spark arrester,and put a new spark plug in it.What ...

I forgotten which way to turn if you want to unscrew the coil of the brush cutter. I want to put in new cutting string Check out smalleng.com they have great vids or just check out u-tube.

have a husquvarna gas line trimmer, needing to put a brush cutter attachment on. how to remove trimmer head? can you show pictures? Here's the instructions

Put too much oil in the Husqvarna brush cutter. It smoked the first 30 minutes of use, then died and now will not start. Did I ruin it. What needs to be cleaned or checked. It uses straight gas. The ...

...put the string head on incorrectly and can't get it off. How can I get it off if the drive piece is on upside down? This may be one of those situations where specifically applied brute force may be ...