Questions & Answers for: pt 110

STK392-110 St. Louis area?? Anyone know of place in the greater St. Louis area where I can pick up a couple of STK392-110? Any help is appreciated. Look in book or online for electronic parts or ...

...TWO STK392-110 IS NEW ORIGINAL, IS A PANASONIC=PT-56HX41E=CHASSIS=AP820 YOUR OPINION PLEASE ATT BONANO [email protected] What is the resistor location as shown on board.....for

Panasonic PT-47WX49 47 i see double on screen, red and green.can i adjust it plz let me know. Requires replacement of convergence IC's....STK392-110 Adjustments will not fix...................T.

...110 on my Panasonic PT-47WXC43G but still I have sound but no picture. The power light does not flash, just stays on. I did not check the resistors! Did I burn the new chips 110 and have to reinstall ...

...pt-53tw53, replaced stk392-110 ic's now have a picture that is bowed in on the sides. middle convergence ok Cheap IC's = open resistor Replace with X 480293 Kit Use IC's from kit to save

...PT-53WX42 television. I am having trouble converging the blue. Any help? Need to replace the convergence amps and any 2.2 ohm resistors in the return. That unit takes two STK392-110 Sanyo amps - but ...

pt-47wx42F with convergence problems.Is your fixto replace the stk392-110 convergence ic's still hold true? Yes it is that set uses the same IC STK392-110 You can get the new ICs at this link and they

installation Where do I buy stk392-110, also can I install by myself? you can get replacement STK392-110 ICs at the following link and they provide free step by step instructions with pictures. http:/

no power when turned on the red light flashs 3 times is this the stk-392-110...? yes the 3 blink error means the convergence circuits have failed they are STK392-110 ICs

...PT-56WX52 set uses two of the STK-392-110 chips for convergence. Both will have to be replaced. I have start to finish step by step instructions for this repair based on me doing it in hundreds of ...