Questions & Answers for: power nikon 5000

...power connector on later Nikon Speedlights and the Power Bracket Model SK-6. It is impossible to connect a flash with the older (square) connector to a newer SK-6 or vice versa. The flash on the left ...

...Nikon scann software 4.0.2. And because I ticked the option "autofocus for every slide" I am under the impression that the scanner will do a autofocus adjustment before scanning the next slide. Did ...

...Nikon service center charged me for changing a power supply unit in the past: that was not the fault in my oppinion; It could be either a software or hardware fault.I dedicated a page on my website ...

...Nikon Coolscan V ED Epson Flatbed Scanner CX 5000 Dell flat screen computer monitor Computer Tower DVD label printer Samsung 10 inch TV Sony Handy Camcorder VHS to DVD recorder, purchased from ...

...Nikon coolpix 5000. let the on switch on. Battery died. lens will not return into the body of the camera It takes power for the Lens to retract. Recharge or replace batteries to get the lens to ...

...not affect the bugginess. I dont use ice on my kodachromes as it seems to get buggy and chops out power lines. I use a soft puffy brush from a camera shop to clean the slide. I have some issues

...when turned off Nikon 5000 - lens won't retract when powered off. Camera won't do any thing at this point. Well, it's either the battery is exhausted, or there is an object sitting in the lens

...tray from scanner Can not remove film tray from scanner . Film tray is stuck I have turned off the power and then used a wire hook manufactured out of a coat hanger to pull it out. My problem is not ...

guidance system. Another way to do this is to place the camera lens down on a hard surface and then power it up. Be sure to use a soft cloth or something similar as to not scratch your lens or casing.

nikon coolpix s3000 lens error Hello The problem is that the lens has become stuck in the barrel. There are some DIY solutions you could try, but the probability is that you will have to get it fixed ...