Questions & Answers for: Maytag Neptune plastic lid

...plastic are in tub. Seems to be coming from washer just under lid. Sounds like pieces of the detergent drawer might have cracked and fallen off. Check the drawer and see if you need to replace

...plastic pin attached to the lid was just barely long enough to push the switch that tells the washer that the lid is closed. The spin cycle will only run when that switch is pushed, i.e., when the ...

...lid. Maybe that part is broken off(its usually only plastic). Or the piece it presses on is jammed. If it's jammed, press on it with your finger or a small screwdriver and see if you can free it up. ...

...plastic lid insert. When the lid is closed, this magnet sets on top of the tan colored plastic pad on the left front top of the base washer unit. When the lid is closed, the magnet activates two, ...

...lid in its down position to insure that when you turn on the washer to a cleaning cycle that there is properly clearance for the gray plastic latches engage to their locked position when you hit the ...

...plastic putty knife blade in the front edge of the machine between the top cover and the cabinet and in line with the lid seam on the left and on the right. Push in to release the latches holding the ...

...plastic inner lid toward you then down. This will let you see if the magnet is in place on the right front corner of the inner lid. http://fixitnow.com/wp-content/uploads/2006/09/washer_switch.JPG ...

...plastic putty knife or similar tool in line with the lid seam and push in to release catches on the left and right side. The top cover can then be hinged up. Once the top cover is raised, remove each ...

...or some molded plastic so I assume your are speaking about the metal parts ie. lid, washer top base and cabinet. There are some parts on e-bay from time to time such as 25001117 Lid (white) ...

...plastic hook on the washer (not lid) & now it won't go into the wash cycle. Evidentlly that was not a smart thing to do! Any suggestions? Google this for a similiar issue of breaking the Left ...