"No paper" or "Wrong paper size" warnings Even though it has successfully printed over 2300 documents in its lifetime, our magicolor is finally giving us problems. We recently had to get a new ...
Question about MAGICOLOR 7300EN LASERPR COL 20PPM 128MB ETH USB REFURBISHED Printer
...7300 is printing out of register. Has anyone found a way of sorting this out? Check all your paper tray make sure all side guide are set properly to the size of your paper. Check the front on ...
Konica/Minolta majicolor 2300DL printer Printing ONLY 1 page of the document when using letter size paper...then windows xp in the printer/fax window says error message. restored factory settings, ...
paper sizes to A4. Save the new settings to the new Easy Set. Click apply. should be o.k. If the printer gives this fault also with "copy" then look here: http://www.youtube.com/watch?v=jlyuPJW6RjU It
Konica Minolta paper mismatch problem I have a minolta colour laser in our staff room, it has been working absolutely fine, but it now displays a "paper mismatch" error, i have tried all the logical ...
...try to print a document/s it will print the first page only then comes up with an error 'incorrect paper size (1LT)' the paper size is correct (A4) and the paper size setting is A4. If I take the ...
Question about magicolor 2300DL Laser Printer
paper tray see's legal size and we need it to be letter size paper Usually there is a setting in your menu to change the paper settings, if not look in the tray itself and see if there is a size on it
I have a Magicolor 1690MF lazer printer after I print one page i get an error "paper size error reset paper (1A4) press Start key doing this it automatically prints the same document again and ...
paper size. How to do it? Smallest custom size is 92x184mm. For example: J postcard from default sizes of this printer is 100x148mm - so it is theoretically possible to print on shorter media, but how
Question about magicolor 2550 Laser Printer
Top margin on the printed page is off 2-3 in. Ater printing skows paper jam but there isn't any. Solenoids don't stick but the lowest one never gets activated. Could that be the problem? might be that
Usually answered in minutes!
321 Questions
259 Questions
244 Questions
182 Questions
115 Questions