20 Most Recent Konica Minolta magicolor 1690MF All-In-One Laser Printer Questions & Answers

Konica minolta 1690mf process error belt clear by cover

KONICA MINOLTA 1690MF ERROR:
process error - belt (clear by cover)

SOLUTION: Open and close the scanner unit. Reseat the Image Unit and cycle the power to the machine. If the error persists and the machine is covered by warranty, a printer exchange is recommended.

KONICA MINOLTA SUPPORT PAGE:
https://kb.mykonicaminolta.com/selfservice_bus_anon/microsites/search.do?cmd=displayKC&docType=kc&externalId=TAD-doctad227704html0&sliceId=&docTypeID=DT_TAD_1_1&dialogID=10562139&stateId=1%200%2010556672

Konica Minolta... | Answered on Dec 06, 2020

2 Answers

Can i reset the drum unit for 1690 mf

Deleting reset Minolta Magicolor 1600W drum / Xerox Phaser 6121 / Oki C110 / Epson C1600 and derivatives identical engine. All the instructions in the link. Can be translated into google.

reset-drum-unit-1690-mf-drep1qcu2aclflpmzd1fe3xv-4-0.png

reset-drum-unit-1690-mf-drep1qcu2aclflpmzd1fe3xv-4-0.png

Toner do drukarki materiay eksploatacyjne Kasowanie reset bbna Minolta...

Konica Minolta... | Answered on Aug 31, 2020

2 Answers

Konica Minolta 1690MF causing Fuser Paper Jam

The problem is in weakened solenoid's (SD2) spring (10). That solenoid located under metal cover (13) on left side of 1690MF (if look at front of them). Required solenoid has red wires. Remove metal cover with 3 screw, unscrew solenoid and just slightly stretch spring (10). That is all.

Konica Minolta... | Answered on Jul 14, 2020

3 Answers

Process error-belt clean by cover-konica minolta 1690mf

replace the belt

Konica Minolta... | Answered on May 12, 2020

1 Answer

Why does my Konica Minolta 1690MF have a fuser jam error whenever I print in color?

Fuser problem

Konica Minolta... | Answered on Aug 15, 2019

1 Answer

Reset counter

for what counter are you resetting?

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/normanj_7893313f0751935f

Konica Minolta... | Answered on Jun 18, 2019

3 Answers

I have a Magicolor 1690MF

check paper tray

Konica Minolta... | Answered on Jun 13, 2019

1 Answer

How do I remove a wad of paper that got jammed on the way out of a Konica Minolta Magicolor 1690mf?

If it got jammed in the fuser unit (the hot part) the fuser can come out as a unit then remove the media wad

Konica Minolta... | Answered on Mar 02, 2019

2 Answers

How do i fix the error message MACHINE TROUBLE

1. Main switch is tuned ON.
2. Press the following keys in this order
2 -> 6 -> 2 -> 7 ->3
3. Main switch is tuned OFF/ON

Konica Minolta... | Answered on Feb 12, 2019

1 Answer

What does I/C dead mean?

image cartridge for that color y-yellow, c cyan (blue) m magenta (red) k = black replace it

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/normanj_7893313f0751935f

Konica Minolta... | Answered on Mar 25, 2018

1 Answer

I/C LIFE END REPLACE I/C

your drum unit need to be replaced

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/normanj_7893313f0751935f

Konica Minolta... | Answered on Mar 10, 2018

1 Answer

Error code 3c10

Sir/Mam,
You hit a serious code, noting can be done, this code requires a tech to come out and remove a chip inside the machine, which is then sent to Konica Minolta, then on to the US SECRET SERVICE since someone attempted to counter fit US currency!!!!!!!!!!!, until the US Secret Service determines what was done the machine stays inoperative , once what happen is determined tech will come out reinstall the chip reload firmware, and .NEVER EVER PLACE ANY CURRENCY ON A COPIER all the machine now a day have Bank Note chips.

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/normanj_7893313f0751935f

Konica Minolta... | Answered on Mar 04, 2018

1 Answer

Error message 0094 after change drum unit

2 transfer roller issue open the located across from the transfer belt sponge looking roller check it

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/normanj_7893313f0751935f

Konica Minolta... | Answered on Feb 25, 2018

1 Answer

How to replace imaging unit KonicaMinolta 1690MF

Self Help Product Support Konica Minolta Business Solutions Inc

try this

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/normanj_7893313f0751935f

Konica Minolta... | Answered on Feb 19, 2018

1 Answer

How to reset i/c on 1690mf after it has been replaced?

Enter in the service mode,select counter mode and select special parts mode.

Konica Minolta... | Answered on Aug 26, 2017

1 Answer

I have an error code 0094, and have the service manual went through the check, all working fine apart from changing the printer circuit board, what else could be , any suggestion ? thank you

Code has to deal with 2nd Transfer roller the sponge looking roller across from the transfer belt

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/normanj_7893313f0751935f

Konica Minolta... | Answered on May 07, 2017

1 Answer

I have a konica minolta 1690mf. paper feed problem error 094

transfer roller issue

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/normanj_7893313f0751935f

Konica Minolta... | Answered on May 07, 2017

1 Answer

I have a konica minolta 1690mf. paper feed problem error 094

Transfer roller issue. the sponge looking roller across from the transfer belt.

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/normanj_7893313f0751935f

Konica Minolta... | Answered on May 07, 2017

1 Answer