Questions & Answers for: Lexmark paper roller

...paper pickup roller problem is as much thatyou have checked that there is no obstacle in the paper path. for the range the printer belongs to and the couple of years use check the paper pick-up ...

...paper pickup roller and pad separation. Open the paper tray and check for paper dust on pickup rollers Clean the rollers and separation that is fixed in the tray itself using damp cloth. hope this ...

...paper to the main roller, which then passes it to other rollers, coronas, transfers, and such. That is the How, in short, Now the Why. That little blue roller wears down over use, like an eraser. It ...

lexmark e250dn Will perform great, only issue, when the paper tray is just about empty - less then 1/2 full- the paper will not feed properly, will show paper jam, sheet remains crumpled in the paper ...

roller drags several sheets of paper and results in a paper jam Each time I print the roller drags several sheets of paper and it results in a paper jam. The problem could be with the roller itself ...

printer says paper jam when there is no paper jam hit the ok button and it will print out a paer fine and then say paper jam again. repeat the rollers that feed the paper into the machine have a a set

...paper, the roller goes around but the paper is not feeding through This is due to a build up of paper residue on the pickup roller. If you look in the back of the printer where the paper is inserted ...

...roller prevent transport of the paper. The rollers are porous and grips the paper and transports it through the platen. Over time the rollers gets slick from the paper and begins to jam or stay in ...

...paper feed roller, so if you find the pad, you've found the roller. Clean it and your jams should stop. Three Roller Paper Separation System- Pull your paper tray out, and look for a roller on either ...

paper feed won't pick up paper. tried to put single paper in but paper jam light goes on but no paper located. we think we need new rollers for the paper feed but not sure where to get them in ...