Questions & Answers for: Chevrolet Silverado 1500 panel lock

Question about 2000 Silverado 1500

1 Answer

...panel (piece closest to the outside mirror). This can be done with a plain screwdriver and just a little prying and it will snap off. Second, remove the door lock inset, same screwdriver, little ...

Ad

Question about 2004 Silverado 1500 Crew Cab

1 Answer

...panel off to check things out. the truck is a 2004 Silverado Crew cab 2 WD It is the door lock actuator and its real easy their are a few cover plates on trim remove and take out the srews then take ...

Ad

...panel is there a reset I can do to possibly fix the ignition lock. All help is appreciated. I believe that the vehicle antitheft is tied into the drivers door lock. Maybe ...

Question about 1999 Silverado 1500

2 Answers

...panel out of the way check the lock rod plastic clips for damage and or binding repair or replace problem replace panel -good luck It probably needs to be taken apart and lubed. I use my pickup a lot ...

...panel (piece closest to the outside mirror). This can be done with a plain screwdriver and just a little prying and it will snap off. Second, remove the door lock inset, same screwdriver, little ...

...panel with a flat head screwdriver. Then simply pop out the door lock cover from the aft side and the door handle cover from the aft side as well. Then pop up your cap containing the auto door locks ...

...panel (piece closest to the outside mirror). This can be done with a plain screwdriver and just a little prying and it will snap off. Second, remove the door lock inset, same screwdriver, little ...

Question about 2004 Silverado 1500 Crew Cab

1 Answer

...lock-actuator.html --------------- How to Access car door panel? http://howtobyme.blogspot.com/2011/11/how-to-access-car-door-panel.html ---------- Vehicle door panel components?  ...

...door is with a key any suggestions remove the door panel and see if theres power to the power lock actuator is so the actuator is bad if not power locks remove the door panel and check the linkage ...

...panel). 7. Release the unlock button. 8. The door locks should cycle, indicating that you did everything correctly. 9. Have all your remote entry fobs available. Hold down on both the lock and unlock ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Manuals & User Guides

Loading...