Questions & Answers for: onkyo ground wire

Onkyo to an HD TV. The microphone autobalancing trys to eliminate the hum by setting the speaks in - db which doesn't work. I suspect an open ground or bad cnnection in your hdmi cable to the amp from

onkyo amplifier everytime turn on the power about 1 second it rurn it off than going to standby mode I check all the fuse and check the speaker wire nothing wrong with it i even check the power input ...

...Onkyo receiver won't turn on. When I power it, it just keeps clicking. Any suggestions. I don't think there is warranty, bought at auction Here are your options: 1. An electrical problem, where your ...

...ground the Onkyo to the sub. I used a length of electrical cable between a panel mounting screw on the back of the sub and a screw on the casing at the rear of the Onkyo. Try it out with a piece of ...

...ground wire however my onkyo receiver doesn't appear to have anyplace to connect the ground as I have inputed the jacks into the dvd inputs (no phono inpust on the receiver) is there a way to connect ...

...Onkyo receiver and they appear to be securely connected. may be u have a power problem check if ur ground is well connected to ur amplifer and also check the input cables if there ground wires r ...

All speakers are humming new system just bought today, have configured several times I have always went straight to the ground wires when a hum occurs in a speaker or speaker system. Are they in phase

...Onkyo CR515 Trio turntable has earth cable yes you can but you will need a phono preamp such as the one found here. http://www.turntableneedles.com/Phono-Pre-Amps_c_4.html Hook the output of the ...

...ground wire on an Onkyo CP1100A turntable? I'm getting a hum. Thanks. GK Some amps have Earth connections for them. But any kind of metal might do it. The CP-1100A does not have a ground connection. ...

ground onkyo cp-1036a Getting a feedback hum and was hoping to ground the TT. If the receiver doesn't have a ground lug, you can loosen one of the cabinet screws and connect your TT ground wire to the