HP 1310 All-in-One Paper jams. I can't seem to get it to stop grabbing a piece of paper and then just stop half way. check inside for little extra pieces of paper
piece of one piece of paper is jammed somewhere in the printer and I don't know how to open it to know where to look In the back of the printer is a big hatch "allmost a door with a nob in the middel"
Question about Photosmart C7180 All-In-One InkJet Printer
...will print one piece of paper, then the error message comes up,"load paper" even though paper is there. I have to unplug it again, restart, print one piece of paper, unplug, restart, etc. Try
Question about Officejet Pro L7780 All-In-One InkJet Printer
...piece is narrow, with "teeth" like projections on one side and two 3 prong claw like projections on the opposite side. Any ideas? Hello, Refer the link below. you will be able to fix the blue plastic ...
Question about OfficeJet 6210 All-In-One InkJet Printer
I took a plate off the bottom of my HP 6210 to clean up as much ink that had spilled as possible. I now have a 3 pieces to put back. The gray plate, a black "L" shaped piece and a retangular white ...
Question about Officejet Pro L7590 All-in-One InkJet Printer
Paper jam, removed paper but still says jammed. Is there any way to tell where the jam is or reset machine ? You should be able to have a piece of paper feed all the way without hanging. Most of the ...
...one of the A piece of the plastic that holds one of the cartridges in place broke. I now keep getting printer cartridge failed. Can I get that little piece replaced?? Hello. If you have that little ...
Question about Compaq Evo N800v Notebook
piece like the one you just looked at and firmly press the key evenly on top of it until you hear the click sound. You may have to rock it a little to get it to fully engage. If it sticks down, take a
together and it works except i have one piece left over where does it go You didn't give any information about the size and shape of that "extra" piece. So, there's no way for you to get help on FIXYA
piece activates a swith that tells when the cover is open. With time that piece wears-out, so the solution is to replaced the cover or wrap that piece with scotch tape (one single turn will be enough)
Usually answered in minutes!
2,817 Questions
2,162 Questions
1,869 Questions
1,584 Questions
1,504 Questions