20 Most Recent
Questions & Answers
Install feed rollers in ADF of HP scanjet 5590
You can get a service manual at this website address (HP website):
ADF document feed
Hi, The problem seems to be a piece of debris , paper stuck in the ADF roller assy. You can check this by opening up the adf cover and inspecting the paper path. I have seen where a very small peice can cause paper path problems to where something is blocking the paper> Good Luck!
I WANT SHARE MY HP
This model scanner doesn't have any built-in way to connect to a network. You need to connect it to one of the wired ports on your router with a USB print server like this
. The server provides the link between the scanner and your network so that it can be used by any connected computer.
The ADF (often not always) does not pause after
this is a generic problem as many customer faced a problem when using this scanjet scanner with windows vista to be particular windows vista as well as win 7.
solution:please fiollow this link..you will find the answer to your queries as well as many other information which is required..
have a nice day!!!
When scanning with the ADF all I get is a white
You could be feeding the paper upside down.
Try turning the sheets over and re-scan.
The paper travels into the scanner from the top and then onto the glass. This means the paper should start out with printing face up.
HP ScanJet 5590 and OS 10.3.9
I would do a manual uninstall and make sure to do the device utility at the end and follow the directions step by step from this link.
Redownload the drivers and make sure they are for 10.3.9 and the full feature software to make sure the right drivers are going to be installed.
Also I would unplug the unit while it is on and plug in directly to the wall to make sure not a power issue. The printer does not share power well and pulls it in large amounts - when it can't get it it throws little power fits and sometimes will not turn on at all or it gives error messages.
Not finding what you are looking for?