Questions & Answers for: Nissan 300ZX oil fill

Question about 1990 300ZX

1 Answer

over fill of oil ive have over filled my motor drain the oil back oit through the oil pan drain plug, and re-fill with the correct amount.

Ad

Question about 1990 300ZX

1 Answer

oil over fill ive have put to much oil in my motor Too much oil is bad becuase you can acutally cause the pistons to not be lubricated properly, also the pump pressure may become too high. Best thing ...

Ad

Question about 1996 300ZX

1 Answer

...fill with antifreeze and water mix. 50/50 oil: jack up car, find oil plug, directly behind steering rack on oil pan. undo plug and drain oil into container. while oil is draining remove oil filter. ...

oil pressure as well. i ordered a fuel pressure regulator but i am starting to have doubts that/s it? how can i tell for sure that my regulator is bad and of not that what else could it be? As a quick

location of fuel filter on 88 nissan 300zx Please take a look at this photo and you will see it is off to the side of your oil filling valve cover....

oil to fill until it runs out of hole. Replace plug using thread tape on plug threads and tighten firmly. This is done from underneath vehicle preferrably not raised unevenly on a level surface, or on

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

Manuals & User Guides

Loading...