20 Most Recent 1991 Nissan 300ZX Questions & Answers

0helpful
1answer

I replaced my fuel injector # 3 and all spark

the ecu is located behind the passenger kick panel , there is a little window at the top of it which has 2 lights in it red and green, turn the key to the on position, do not start engine, push gas pedal all the way down then release, the lights will start blinking, for example if you get 3 green blinks and 2 red blinks that means code 32, 5 green and 1 red code 51, there is a list on the front of the ecu that tells you what each code means
2/6/2018 1:30:49 AM • 1991 Nissan... • Answered on Feb 06, 2018
0helpful
1answer

Code 21

Try the crankshaft sensor
1/1/2018 10:19:46 AM • 1991 Nissan... • Answered on Jan 01, 2018
0helpful
1answer

Drivers side front fender ,headlight and parking light removal

IF YOU LOOK ON YOU TUBE THEY WILL SHOW YOU HOW
11/17/2017 6:17:10 AM • 1991 Nissan... • Answered on Nov 17, 2017
0helpful
1answer

Where to locate nissan 1993 300zx speed sensor

On all 300zx NA the speed sensor is on the passenger side of the transmission. There is portion called the adapter plate in the middle of the transmission when looking at the side profile. This plate is about an inch thick and seems to separate the transmission from the front main body to the rear housing. The speed sensor is just aft of this (towards the rear of the car). It is round smooth top with a set of wires coming out of it leading up to a brown plug (no sure if color changed for different years)
3/16/2017 2:32:11 AM • 1991 Nissan... • Answered on Mar 16, 2017
0helpful
1answer

1991 Nissan 300ZX fuse box diagram needed

first here is the service manual http://www.300zx-twinturbo.com/cgi-bin/manual.cgi

next is the kick panel http://209.85.62.26/12640/0/upload/p979648.jpg

These should be right or very close .
11/26/2016 3:59:52 PM • 1991 Nissan... • Answered on Nov 26, 2016
0helpful
3answers

My low beam headlights won't work but high beams work fine. I changed the bulbs and it still doesn't work

High beam switch moat likely, have you checked relays and fuses?
5/13/2015 2:08:31 AM • 1991 Nissan... • Answered on May 13, 2015
0helpful
1answer

Where is the connector used to pull codes for a 1991 Nissan 300zx

According to OBD standards it should be reachable when you are sitting in the driver seat. Since it is made before 1997 it is a OBD1 not OBD2 connector.
12/1/2014 5:10:46 AM • 1991 Nissan... • Answered on Dec 01, 2014
0helpful
1answer

1991 Nissan 300zx will turn over but will not

no spark means you are not getting any fuel ck the pressuer on the fuel rail ,
10/21/2014 2:37:09 PM • 1991 Nissan... • Answered on Oct 21, 2014
0helpful
1answer

Auto to manuel swap what wires need to be replaced

What does not get power?
8/19/2014 6:09:32 PM • 1991 Nissan... • Answered on Aug 19, 2014
0helpful
1answer

Why does 1991 nissan 300 zx die when the motor warms up?

Is there a MIL on, what is the code if so. May very well be a coolant temp sensor or connector corroded.
8/19/2014 4:00:56 AM • 1991 Nissan... • Answered on Aug 19, 2014
0helpful
1answer

What is causing my squealing belt?

I would check belt tension and then Idler pulley bearing..If still nothing check the A/C compressor clutch..
7/19/2014 5:22:19 PM • 1991 Nissan... • Answered on Jul 19, 2014
0helpful
2answers

300zx rpm problem

check throttle position sensor and throttle body
5/11/2014 10:11:32 PM • 1991 Nissan... • Answered on May 11, 2014
Not finding what you are looking for?
1991 Nissan 300ZX Logo

205 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

Top Nissan Experts

Marvin
Marvin

Level 3 Expert

85241 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22509 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15080 Answers

Are you a Nissan Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

300ZX Nissan

  • 300ZX Nissan

Most Popular Question

low beam headlights won 39 t work but

  • Cars & Trucks
Loading...