...nose and tighten the clamp screw. Carefully clean out the tapered hole in the chuck and the spindle taper using a clean cloth. Hinge up the shield. Push the chuck onto the spindle and lightly tap the ...
...piece on the saw. they should fit together so that the bar will sit flush against the clutch plate and saw. attach the cover with the nut and tighten just enough to hold the cover on. then turn the ...
nose piece or discharge end. We have had the nailers replaced under warranty twice and ended up taking one out of service to rob the part to make another work. Makita has said that there is no problem
need tofind a used nose peice This solution may sound way out there, but generally nose pieces are expensive, so you may want to go hunting through the pawn shops for the same model, in crappy ...
...with a piece of 1/8" flatbar and 2 #10 bolts. It isn't pretty but it works. You could use a pair of fine needle nose locking pliers [vise grips] and possibly be able to get enough of a bite to do
...nose ensure it rotates easily at least one complete revolution. Clean the saw oiler hole and channel. Insert a blunted, hooked piece of wire through the oil filler hole and pull the hose in the oil ...
Usually answered in minutes!
104 Questions
75 Questions
18 Questions
