...MITSUBISHI GALANT WONT START AFTER TIMING BELT CHANGE how to change crankshaft position sensor check the crankshaft position sensor on the bottom of the crank. There is a disc with wings behind the ...
...wont star 1 have 97 mitsubishi eclipse good car never gad any problems with it, it has a 2.0 DOHC. i was driving it when one of my water hoses disconnected needless to say it overheated for maybe 4 ...
...mitsubishi diamante that overheated now the car wont start and when i crank it it sounds like the timing is of it whines Sounds like it may have blown a head gasket, and or craked/warped a cylinder ...
It overheated it and it wont start You need an engine, then...
2003 mitsubishi 2.2L wont start after overheating 2.2L cylinder head or blown gasket.
wont start my car got hot and quit it started one time after i got it home and now it wont start Please give more information.. you say it got hot.. do you mean it overheated ? radiator boiling and ...
...mitsubishi outlander wont crank after overheating I replaced the radiator, that was the source of the overheating. Refilled with antifreeze/water and it still wont start? I would check the inside of ...
Question about 2006 Outlander
...wont idle what is the problem and how do I fix it May simply be the throttle body adjustment. This is all dismantled to get to the head gasket. They must of disconnected ur battery any time this is ...
Question about 2000 Galant
...mitsubishi alant it overheated then lost power then died off i cooled it down filled it up with water try start it wont start it turn over put it turn fast it sound like when the timingbelt broke ...
I have a mitsubishi galant 2002 it overheated and died and wont start now you most likely blew the head gasket as you kept driving the car as it overheated. good job now its gonna cost you.
Usually answered in minutes!
4,236 Questions
3,749 Questions
3,350 Questions
3,279 Questions
3,219 Questions