Questions & Answers for: mackie speaker fuse

where is the crossover located in the mackie srs 1500and does the crossover have a fuse. The Mackie SWA1501 has an active electronic crossover on its main circuit board.

...fuse in my Mackie SRM450 The fuse on these is not a user serviceable item. write to Mackie Designs, Service Dept, 16220 Wood-Red Rd NE, Woddinville, WA 98072 Fuse is inline behind the triad AC cord ...

blowm fuse i have a mackie swa 1501 that i got from a friend it doe not have any fueses in it can you tel me the fuse size for 110V supply use at least 8Amp fuse but for 220V supply 4amp will do.

...fuse in a grey Mackie SRM 450 ? The fuse is actually on the inside. You will need to remove the amplifier from the back of the unit. Remove all the screws and pry open the unit. The fuse will be on ...

speaker Mackie say this is not a user service part. If the fuse has blown there is probably a fault in the unit being their reasoning. I know for certain they tend to blow for no apparent reason so it

how can you replace fuse for mackie speaker 450 and where to locate it? SRM450V1 fuse is located inside amp just where the AC mains connector is, hope it helps.

...speaker at full power draws average 1.3A at 230V and 2.5A at 120V. Mackie's recommended fuses are in line with this so your fuse is actually too high a rating. It is possible you are using cheap fast ...

...If one swap speakers if the problem moves you blew a speaker. If not you blew something in the Mackie. I do not know if there is a fuse but it may still be under warrenty, it might be smart to

...Mackie, ive tried another amp in the speaker and it works fine, its not the fuse, so im thinking something may have blown. I also have another Mackie which works fine.. until u push it ... then it ...

...Mackie and it doesn't make a difference. Fuse seems to be just fine. Thanks lots Mickey Your best bet is to contact Mackie Tech Support. Here is a link to their Suppot page. Mackie Tech Support it's ...