Questions & Answers for: left channel output

...left not the center channel. From the preamp currently have two interconnets from the outputs to power amp. The preamp has another set of outputs but I want to connect so that all three channels are ...

left channel is low the output to the front left channel is significantly less than all others. I switched speaker and wires and it has been isolated to the left channel and not the speakers or wires.

...channel. Left channel is very quiet and grainy. I have took cover off and checked components, nothing obvious. Can anyone help? check stereo settings after that if it still persists your left channel ...

I turn it on and i get like this wave of static then it fades out but there is still a lot of static in the left channel. if its only on left channel you have to change the ic output from that channel

left channel. Output to speakers is weak on left channel. Switched output cables and now right channel is weak. Any ideas? switch input cables and try this will confirm if the amp has a problem or the

...input on the Bose...then the right output on the Bose , to the right Speaker..the Left output on the Bose to the left speaker...and finally the center channel output on the Bose to the center ...

...left and right channel speaker outputs of the receiver to the left and right channel speaker level inputs on the subwoofer (the speaker inputs on the right side of the photo). Using speaker wire, ...

...left channel and compare it with the right. Ignore any parts common to both channels. The first thing to do is a visual check. If something looks broken burnt, or odd compared with the right channel ...

...left channel audio output? Tested both sets of speaker outputs, A and B. Both sets of right speakers work, and both sets of left speakers have no sound whatsoever. It is likely that the left channel ...

..., Others have had the same issue. It is an older desk as far as electronics go. https://www.google.com/search?q=soundcraft+efx+12+no+left+channel+audio+output .. Check the inserts and pan