Questions & Answers for: Dodge key barrel

key barrel problem. Would it help if I started from the other end by disconnecting at the electrical contact on steering column where the ignition action rod connects from here to the barrel. Not sure

...locked. When the key is in the ignition it will not turn. Help if the key is badly worn or bent try a new key but if doesnt work you might need to go to a locksmith to get the key barrel ...

...key. This has happened in the past but I was able to jiggle the keys and it would eventually turn...it's like it's not identifying my key as the "one". put some oil down the barrel where the key ...

...Key is worn. Once the car starts is operates normally and will start normally several times after a no start event. So is replacing the lock barrel a difficult repair task? Its more time consuming ...

...barrel, then gently turn key 90 degrees, and offer into barrel housing, ensure the secure pin is at all time still into the barrel, slide the barrel into houseing slowly until you mate up the barrel ...

...hole,pushin and turn the key further off. THe barrel should slip out REplacement will be the opposite. If there is no hole look around that area as most units are held in with a retaining pin or ...

key in the ring (...) start with the other key the car.The immo will read the regular key but the new barrel will work with the new key.Need reprograming the keys or switch the boards/chips in the key

...top reprogram the immobilizer It may be cheaper to get a locksmith involved to fit a new barrel keyed to your existing key and that way the expense of programming the key to the immobilizer is ...

...barrel , it would have to be reset to your key so that you could insert the key and activate the immobilizer system another way may be to get the entire lock system from a wreckers and have it ...

...as the key barrel and switch are two different items , talk with a locksmith as to replacing the barrel you can get him to set the barrel tumblers so that you can use the existing key before he fits ...