...clutch shaft rotation. The clutch shaft should be turning when changing gears. This allows the slider gear dogs to engage, or disengage, other gears easily. Try shifting to neutral while slipping the ...
an oil line plugged on the shaft or a collar? Check the actuator rod, that long rod that goes from the clutch release arm to the clutch basket. It may be bent and hanging up causing partial engagement
...clutch arm shaft that goes into the casing. At worst, only the springs on the operating plate would need to be removed then a 1/4" inward push on the rod from the right side would give clearance for ...
kawasaki ninja zx9r clutch problem so i have a 98 ninja zx9r, and recently my clutch cable lost all tention whatsoever.. and so i checked the cable.. the cable is fine.. but the return spring on the ...
Question about 2010 Gravely Zt 42 Xl Zero Turn Mower Kawasaki ()
...shaft? A diagram of the clutch assembly would help. Instruction on removing and reinstalling might help. There is an "anchor" that bolts to the chassis, and it has a rod-like part that sticks up to ...
...clutch shaft to turn even when the bike is in neutral and the clutch is dis-engaged ( handle pulled in ). When the shift fork moves to engage 1st gear, the bike jumps due to the shaft rotation. When ...
...Kawasaki...2nd won't engage until the output shaft is turning at approx. 12 mph. This is to make neutral easier to find at a standstill. If you spin the back wheel to a decent speed by hand then ...
Question about 2000 VN 1500 Vulcan Classic
Kawasaki KLX110 and my kick start moves and makes a noise, but will not start bike. I've taken shaft off and gears are fine. Can you tell me what may be problem? When the kickstand is down it pushes a
Question about 2000 VN 1500 Vulcan Classic
...Clutch not disengaging. 2. Bent shift shaft. 3. Shift fork bent or seized. 4. Gear seized on the shaft. 5. Gear positioning lever binding. 6. Shift return springs weak or broken. 7. Shift return ...
Question about 2000 VN 1500 Vulcan Classic
...Kawasaki dirt bike, cranks on first kick, idles but won't run in any gear, doesn't die out but doesn't seem to engage gear, possible problems? Does it jerk forward when you put it into gear and die? ...
Usually answered in minutes!
652 Questions
681 Questions
595 Questions
586 Questions
644 Questions