Questions & Answers for: Mitsubishi ignition lock

Ignition lock Hey all, The igintion on my 91 Eclipse has just recently started locking every time I try to turn the key, even when the steering wheel isn't locked. It seems to run well once it finally

ignition towards the 'LOCK' position (there may be a button, or the need to push the key further into the keyhole). You should get the key into the 'LOCK' position and allow you to pull it out. Let me

ignition lock up. cannot turn key when inserted. Car is in park. key will not turn. wheel is stuck. tried locking and unlocking car door and retrying ignition, but did not work. Tried taking off ...

...ignition,the door locks should cycle twice.if not start over.it may take a few tries. 8-press lock/unlock together and hold for a second 9-release,and press lock on remote,the door locks will cycle ...

...out of the ignition after i put it in the lock position am i doing something wrong or failing to do something the ignition cylinder tumblers have jamb. A new lock will fix this only ask any ...

...ignition switch, steering lock and bracket. Installation To install, reverse removal procedure. Use NEW steering lock bracket and bolts. Temporarily install ignition switch and steering lock cylinder ...

...lock position, the problem would be the rod inside ignition switch is malfunctioning. If you know how to remove it, you cold easily it and replace the switch if it is unrepairable. A garage could ...

...lock cable can be disconnected and the key will come out of the ignition again (?) Nope the tumblers in the ignition cylender are worn and bent causing the key to be stuck. Ask any locksmith and they ...

...ignition lock cylinder but car wont start The lock cylinder only lets the key turn to enable the ignition switch. The only way the lock cylinder would prevent the car from starting is if it no logger ...

...of the car make sure shifter all the way in park,turn steering wheel back and forth while turning key to lock and remove key, if this works the ignition lock linkage is probably worn and needs ...